Fairing?

[Skools Out]

hope this info helps some oh and we need pics of the work lol

[rebel44]

Thanks much I'll use that as my guide.

86 v20 CC I actually started on it 2 years ago and then stopped. not much done.
I ordered a shed to work in, in 2 weeks it'll be installed and the work will continue.

[rebel44]

I bought 2 qts of the wr lpu paint for the hull, (lopez blue)along with the primer.
Also picked up the orcas white for the interior and the whidsey white for the deck to cut glare.

Also ordered the quick fair.

around $400 altogether.

I might stick with the interlux bright white for the hull bottom...cheap and easy to work with.

It'll have a red stripe between the blue on the hull sides and the white of the hull bottom. I'll probably just use tape for that.

I've done a boat like this before, it came out great and the paint was still fine after 3 years and that was with cheapo interlux.

[macojoe]

[rebel44]

I post up when i make progress,

for now, it looks like this,




and when done it'll have same color scheme as this 1970 23' Winner I did.

[rebel44]

I read that it is bad to use bondo on a boat. But with 2-3 coats hvlp epoxy primer over it then why not?

[nipper]

That Winner was a nice looking boat.

[Skools Out]

bondo is used by some boat builders as chine filler they then glass over it with coulpe layers of glass not and issue so you can use it, just seal it up with light glass and resin.

[bradford]

Thanks for all the info Skools!

That Winner is sweet Rebel44!