For thos that have done pourable transoms?

[nymack66]

Ferm the heat will peel it off it gets very hot, seal it with resin plus the fresh resin creates an excellent chemical bond between the skin and Arjay whatever way you go remember this stuff flows like honey :)
Here is an example how this stuff bleeds through even with resin and cloth on the inside ..

[mauryc]

Heavy duct tape. Don't forget both sides of the holes. Yo udon't want to fill your bilge up with this stuff. Seal even the smallest holes or it will ooze out. No need for dowels. You can drill it out very easily. Two years into it I am very satisified with the results.
Maury

[THEFERMANATOR]

I ran into some serious snags on this transom so it is on hold for right now. The wood in it was sandwiched together with 3 layers of cloth and screws every 6"s across the bottom, sides and top. I got most of it out, but the bottom portion has turned into a nightmare so I am going to have to cut the skin off from the outside and clean it out.