this years winter project

[Geekie1]

Hi Captpete,

The 55 gallon Moeller I presume is a belly tank?? It will fit front to back depending on what V 20 you have. (I have an 84 v20 OB cuddy) It will not fit under your floor hatch due to the deadrise of the V20, (about 22 degrees) and the angle of the Moeller belly tank is about 12 -15 degrees. I did not find a ready made belly tank that would fit under the floor over about 30 - 40 gallons due to the deep-vee deadrise angle and the belly tank bottom angle. If you need 60 gallons of fuel, the only way is to have a custom aluminum tank fabricated. An aluminum 60 gallon exact v20 replacement tank can be fabricated for about $500-$600. (In NJ) The replacement tank drawing with exact dimensions is somewhere on this website!! Do a search on "fuel tanks".

Geek

[reelapeelin]

This will be fun to watch!!...always good to see somebody knows what they're doin'...sorry to hear about the job goin' away, but a guy w/your skills will never be idle...

[NOTHING ELSE MATTERS]

My boat came with 60 gallon plastic tank but i dont remember who makes it, the sticker is on the tank, i will look and let you know.

[RWilson2526]

Pete just thinking....As far as I know the tank I have in there is good albeit original (no idea for sure until I yank it out) I am only replacing it because I got a 3 year old custom made one out of an 86 V-20 for pretty much nothing and figured as long as I was doing the hatch I'd do the tank....the old one is yours if you want it.

Not sure if its worth the trouble to install a 20+ year old tank but just thought I'd throw it out there.

[NOTHING ELSE MATTERS]

O.K, got the info from my tank.
Is made by INCA molded products in Nashville TN
Phone# 615.350.7290 and is 60 gallons.

[NOTHING ELSE MATTERS]

http://www.incaproducts.com/site/default.aspx

here is their web site.

[captpete13]

Thanks for the info guys. N.E.M. that tank looks shorter and wider than my tank. What are the dimensions? Reel.. thanks. We are jamming at work right now and now the boss is saying we will be working till the 23rd and we will also get paid for the week between Christmas and NewYear. So I will only be laid off for about two weeks. That makes me feel a little better. Rob your the man! I will absolutly take that tank. If you need a hand getting it out let me know. You can use my shop.

[RWilson2526]

Originally Posted by captpete13

Thanks for the info guys. N.E.M. that tank looks shorter and wider than my tank. What are the dimensions? Reel.. thanks. We are jamming at work right now and now the boss is saying we will be working till the 23rd and we will also get paid for the week between Christmas and NewYear. So I will only be laid off for about two weeks. That makes me feel a little better. Rob your the man! I will absolutly take that tank. If you need a hand getting it out let me know. You can use my shop.

Oh now we're talking...the only reason I am even starting to procrastinate is because I dont want to freeze my *** off.....I can see that working out...I'll drag the boat down there, give me a hand pulling it out (which seems to be the hard part) and leave the tank there. Deal....this will stop me from putting it off too until spring.

I need to get whats left of the gas out, I'll try to do it this week and then we can set something up...

[msbhammer]

Looks good, dont stop.

[Airslot]

Wazzup Hammer...