Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Performance

Reply
 
Thread Tools Display Modes
  #1  
Unread 09-01-2009, 03:10 PM
bigshrimpin bigshrimpin is offline
God
 
Join Date: Mar 2003
Posts: 1,597
Default

Quote:
Originally Posted by joe7670 View Post
I keep reading about the concerns of putting a 4 stroke on a bracket due to weight.

I'm looking as yamaha's website and the 150 4 stroke is just 40 lbs. more that the same size 2 stroke model.

Am I missing something with respect to weight that they are not displaying on the specs sheet?

I was almost convinced that I had to go with 2 stroke just from reading posts, but if I can, i'd really like to go 4.
Mid 80's Mercury 2.4L 200hp is only 360lbs!! and they are pretty good on fuel.

http://www.nadaguides.com/default.as...&d=17001302904
Reply With Quote
  #2  
Unread 09-01-2009, 08:05 PM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default

you also have to realize how they weigh engines now, there has been a lot of discusion in several magazines comaring actual weight and advertised weight. Bass and Walleye magazine had an article a few years back that weighed each engine in a as installed running engine with all gear needed for it to operate. It created a lot of heat from the manufactures. For example on a Merc verado, its weighed without a prop(no big deal), gear lube(can't be that much), engine oil and filter(hears a few more pounds), zincs(adding a few more), power steering assembly(big verados only, but you have to have to run the engine, and it weighs a fair amount), so by the time your finsihed, you've added a few hundred pounds(maybe not that much), but you see the point I'm making, on the old 2 strokes, all you added was prop and 2 stroke oil to the weight, so comparing newer engines to older ones can be missleading. From what I remember, the magazine weighed a 250 Yamaha, 250 Suzuki, 250 Verado, and a 250 Honda, all four strokes(some reason they didn't have e-tecs, HPDI's or Opti's in the article, may have been a later issue), all as installed weight to be operational including controlls and any standard item needed to operate the engine. I don't remeber the actual weights, but they all ended up being close to 200 lbs heavier installed, I think the merc was even heavier stripped down than advertised. So when you are comparing weights, just remeber to compare apples to apples
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:28 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.