Mo' prop woes...

[RABBITFISH]

Yep that prop has definitly been worked on before and painted to cover it up...Aluminum does not do well in the repair shop,,Stainless may be more expensive to begin but will take more of a beating and can be repaired to original specs.... Aluminum can be used as an emergency spare to get you home

[Stillrunning]

Yea, that prop has been worked on and the repairs failed. What would worry me more is that it seems someone had hit something had the prop fixed and sold the motor. I just hope the damage is only to the prop and the lower unit is OK.

[Monkey Butler]

I figured it could be a failed repair. Thanks for the confirmation guys.

Originally Posted by Stillrunning

Yea, that prop has been worked on and the repairs failed. What would worry me more is that it seems someone had hit something had the prop fixed and sold the motor. I just hope the damage is only to the prop and the lower unit is OK.

That thought scared me for a minute but then I recalled the history on the motor. Guy I bought it from had gotten it on a 23' Grady that he bought this spring. He took it out once and the shift shaft went. I saw it while still on the Grady and it had a SS prop that he said he was going to be keeping for his the replacement motor that he was buying but that he would throw in the aluminum prop that he was getting with it. So, if this prop took a hit it was while it was on the motor that the previous owner of my motor has now. Hope that's clear as mud. I've exchanged a couple of emails with him since so I might give him a heads up.

[Stillrunning]

Originally Posted by Monkey Butler

I figured it could be a failed repair. Thanks for the confirmation guys.



That thought scared me for a minute but then I recalled the history on the motor. Guy I bought it from had gotten it on a 23' Grady that he bought this spring. He took it out once and the shift shaft went. I saw it while still on the Grady and it had a SS prop that he said he was going to be keeping for his the replacement motor that he was buying but that he would throw in the aluminum prop that he was getting with it. So, if this prop took a hit it was while it was on the motor that the previous owner of my motor has now. Hope that's clear as mud. I've exchanged a couple of emails with him since so I might give him a heads up.

Thats good to know.

[RABBITFISH]

Be sure to do several checks of the lower unit oil after running until you are satisfied that there are no water leaks in the lower unit seals. With the motor on the trailer slowly rotate the propellor and watch the prop shaft for any wobble this will indicate if there is a possible bent shaft..If water is present in lower unit, possibly worn seals or signs of a more serious problem..After checking routinely and getting the same results you will know how good a shape your motor is in...

Tommy