![]() |
|
|
|
#1
|
|||
|
|||
|
My 85 and 86 both had drain holes in the floor that drained into the bilge. If you get alot of water in the bilge, you'll get water coming up thru that hole. You can always plug the hole with a simple transom drain plug.
|
|
#2
|
|||
|
|||
|
My 84 has that drain hole it drains to the hull then under a bulkhead down a pvc pipe to the bilge. When I took the fuel tank out I found a pvc pipe under the tank for a drain to the bilge.
__________________
1984 V20 Steplift Cuddy Seadrive converted to bracket 1992 175EFI Mariner |
|
#3
|
|||
|
|||
|
A day off tomorrow and I'm gonna try to open the drain and figure out where it goes. Thanks for all the input
__________________
1978 V20 Cuddy I/O |
|
#4
|
||||
|
||||
|
mines got it
__________________
|
|
#5
|
|||
|
|||
|
Was there a toilet in it. Mine has two holes for the toilet.
|
|
#6
|
|||
|
|||
|
I'm almost positive there wasn't a toilet there.
__________________
1978 V20 Cuddy I/O |
![]() |
| Thread Tools | |
| Display Modes | |
|
|