|
|
|
|
#1
|
||||
|
||||
Quote:
__________________
 1994 Wellcraft V21 
|
|
#3
06-04-2009, 03:57 PM
|
||||
|
||||
|
Skools Out has a '78 cuddy. He would know for sure.
__________________
1994 Wellcraft V21
|
|
#4
06-04-2009, 03:59 PM
|
||||
|
||||
|
Most boats have a drain to the bilge somewhere in the cuddy area. Need one up there for water coming over the hull orflooding in the cockpit so it will drain back to the pumps.
Usually located at the low spot in the cuddy. A lot of boats have them in the pilothouse floor also. It should be just a hole going into the bildge and supposed to drain back thru openings in the stringers. No thru hulls involved. Also I have seen them with a drain hose going back and without.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#5
06-04-2009, 05:13 PM
|
|||
|
|||
|
My 85 and 86 both had drain holes in the floor that drained into the bilge. If you get alot of water in the bilge, you'll get water coming up thru that hole. You can always plug the hole with a simple transom drain plug.
|
|
#6
06-04-2009, 08:32 PM
|
|||
|
|||
|
My 84 has that drain hole it drains to the hull then under a bulkhead down a pvc pipe to the bilge. When I took the fuel tank out I found a pvc pipe under the tank for a drain to the bilge.
__________________
1984 V20 Steplift Cuddy Seadrive converted to bracket 1992 175EFI Mariner
|
 |
| Thread Tools | |
| Display Modes | |
|
|
CY 1984 V20 STEP LIFT I/O 470 MERCRUISER Wheeling, WV
Hybrid Mode
