|
|
|
|
#1
|
||||
|
||||
the bias circut connects the two switch boxes, irregularvoltage can cuase the good one to damage the bad one. Allways replace them in pairs. I allways check the stator while I'm at it
|
|
#2
05-09-2009, 04:59 PM
|
||||
|
||||
|
i'd replace the motor, at $170 each any 3 in a yr at $510 you are close to a good used Johnson/Evinrude
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's
|
|
#3
05-12-2009, 01:56 PM
|
|||
|
|||
|
Hey builder see if this helps. http://www.outboardignition.com/ I wonder if ometing is causing the one to go bad like a bad coil on that side. This website had a pretty easy way to troubleshoot. Hope it helps.
__________________
1984 V20 Steplift Cuddy Seadrive converted to bracket 1992 175EFI Mariner
|
|
#4
05-12-2009, 03:32 PM
|
|||
|
|||
|
Spare is probably right, but I've also seen a bad coil cause the switchboxes to go bad.
I have a box of 50+ used v6 switchboxes. $25/each and I'll send you as many as you like. Which cylinder (s) are you losing spark on? Follow it back and replace the coil also check the wires from the coil to the switch box.
|
|
#6
05-14-2009, 03:24 PM
|
|||
|
|||
|
PD - Just responded.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
