|
|
|
|
#1
|
||||
|
||||
High rpm's will melt it together.
A battery operated saw or a router that is variable speed works great also. http://www.wellcraftv20.com/communit...=specs&page=15
__________________
 '75 Cuddy with '00 Johnson Ocean Pro 150 horse Benny Last edited by tsubaki; 04-21-2009 at 07:02 PM. 
|
|
#2
04-21-2009, 08:41 PM
|
||||
|
||||
|
Quote:
That's true...if you try to push the blade too fast...I did this bait-tank lid w/a 1/8 "stick" bit...either do 2-3 passes getting little material each pass or full depth and move VERY SLOWLY...2-3 passes works better...    Love whadda router does to Starboard... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
