|
|
|
|
#1
|
||||
|
||||
The epoxy on rods need to turn for hours so that it doesn't sag before setting up. The rotisserie motor turns a slow perfect speed for just that.
The one I have uses 1/4 socket extension with a rubber cork on the end. I just tape the butt of the rod to the rubber and good to go. They sell all kinds of things to get the rod to the mmotor that will get it straighter if need be, I just a DYI guy that hates to buy stuff, and in the end most of the time it would have been cheaper to buy it new!!
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!! 
|
|
#2
10-16-2008, 07:50 PM
|
||||
|
||||
|
Agreed....the flex coat I use is good for no sagging after about 2 hours.
OK, here are the final results. I stripped em and changed a few things, widened a couple bands, etc... Fletched and ready to go! I took them today and weighed them. The original I weighed with with just blazers was actually 1.5 grains heavier than the new dipped and crested ones. I know thats not a true difference...probably just a tolerence let go at the factory by Beeman. I guess that means the new ones are actually no heavier. I thought it would make some difference but it didnt.  
__________________
Really, who ISNT better looking than Charlie?
|
|
#3
10-17-2008, 09:40 PM
|
||||
|
||||
|
Hey Stinkman, beautiful work with the arrows, really very nice. Sorry I have not gotten back to you sooner but I have been busy securing Wall St.
Anyhow I have a modicum of experience with the subject though, so if you got any questions fire away. A little sample of what I have inside the dungeon. Some homemade back quivers assorted accutrements and some arrows.etc.       
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#4
10-17-2008, 09:43 PM
|
||||
|
||||
      
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#5
10-17-2008, 09:47 PM
|
||||
|
||||
    OOPS 
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#6
10-18-2008, 07:33 AM
|
||||
|
||||
|
now you see why I need to build a new space in my dungeon, I am stacked knee deep
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#7
10-18-2008, 06:24 PM
|
||||
|
||||
|
All right where is Stinky now?
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
