Here is my POA (Plan Of Action)
I found a very useful document on Gel Coat it did educated me with enough confidence to go with Gel Coat.
I will post it at the end of this note.
I am indeed planning on doing the “roll and tipping” method using the best roller money can buy and the same goes for the brush
My thoughts are simply this, apply a minimum of four coats, this should give me a build of 30ML or more thickness using a waxed Gel Coat reason for a wax gel it will harden to a smooth finish and give me time between weekends to work on it.
I will simply run a sander to scuff it when I need to apply a new coat.
I will place great emphasis on the type of commercial buffing compound and finish wax that I am going to use (compound and wax have come a long way)
I am in the process of fact-finding on this and will post the type I use etc later.
Keep the thoughts and ideas coming, collectively I think we can accomplish something with these collaborations and ideas.
Here is the hyperlink to the PDF on Gel Coats
http://www.americanmarinesupply.com/pdf/GelCoat.pdf
10-21-2008, 12:06 PM
Hybrid Mode
