|
|
|
|
#1
|
||||
|
||||
Golly I hate working on the trailer worse than working on the boat. Its torture I tell ya.
__________________
 1994 Wellcraft V21 
|
|
#2
06-23-2008, 02:09 PM
|
|||
|
|||
|
Don't make the same mistake I made and do a real good inspection of the trailers frame before buying anything. I replaced all my springs, bearings, axle and was in the process of replacing the rollers when I reached down grabbed the framing for leverage and my hand went right through the frame. The last three feet of the framing was rusted all the way through. The good news was I took off all the roller stuff cut off the rusted ends and made a nice utility trailer with it.
|
|
#3
06-23-2008, 02:29 PM
|
|||
|
|||
|
Ferm,
Even @ $300 each thats a lot more than going back with springs......at least it seems that way. Still, The frame looks to be in very good condition.....but I will give it another lookie before I go at it, thanks. BR, It aint bad with a sawzall and a big hammer.
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
