Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Performance

Reply
 
Thread Tools Display Modes
  #1  
Unread 05-17-2008, 09:40 PM
snoozer snoozer is offline
Member
 
Join Date: May 2006
Location: Marathon
Posts: 65
Send a message via ICQ to snoozer
Default

OK Two new coats of bottom paint, new plugs and fresh oil.
6200 rpm wot, 31.5 Kts. With the wind, one foot chop. Full tank, two aboard.
Against the wind, 6100+/- wot, 30.9 Kts. 18/14 wheel.
__________________
The people should never have to fear their Government, The Government should always fear the people.
Reply With Quote
  #2  
Unread 05-18-2008, 09:21 AM
randlemanboater randlemanboater is offline
God
 
Join Date: Jun 2007
Location: Central NC
Posts: 5,868
Default

Quote:
Originally Posted by snoozer View Post
OK Two new coats of bottom paint, new plugs and fresh oil.
6200 rpm wot, 31.5 Kts. With the wind, one foot chop. Full tank, two aboard.
Against the wind, 6100+/- wot, 30.9 Kts. 18/14 wheel.
So your saying that you cruise at WOT? Thats weird.



Seriously Snoozer, when you bust that prop on a trap going that fast, you should try a 19 or 20 pitch, I think you will like the rpm reduction.
__________________
***************************************

Stay Safe!




Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke.

1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
Reply With Quote
  #3  
Unread 05-18-2008, 02:55 PM
snoozer snoozer is offline
Member
 
Join Date: May 2006
Location: Marathon
Posts: 65
Send a message via ICQ to snoozer
Default

Well Randle, I have no intention of going that fast. But it was a test to see if the motor would go a taller wheel. It looks like it will. The next up stainless is a 20 I think. I'll order one tomorrow.

I want to run this motor in the low fours, so that should give me a little more SPEED. I want to keep up with the jones-es.
__________________
The people should never have to fear their Government, The Government should always fear the people.
Reply With Quote
  #4  
Unread 05-18-2008, 04:52 PM
randlemanboater randlemanboater is offline
God
 
Join Date: Jun 2007
Location: Central NC
Posts: 5,868
Default

I had trouble finding a 20 pitch in the same diameter, they were all a quarter inch smaller around, so I got the 21p......it is probably slightly too much, but I never run WOT anyways.
__________________
***************************************

Stay Safe!




Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke.

1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
Reply With Quote
  #5  
Unread 05-24-2008, 07:40 AM
snoozer snoozer is offline
Member
 
Join Date: May 2006
Location: Marathon
Posts: 65
Send a message via ICQ to snoozer
Default Report

New 14 X 20 wheel. 4200 rpm - 24.9 kts.
Old 14 X 18 wheel, 4200 rpm - 20.4 kts
I like it.
__________________
The people should never have to fear their Government, The Government should always fear the people.
Reply With Quote
  #6  
Unread 05-26-2008, 07:39 AM
randlemanboater randlemanboater is offline
God
 
Join Date: Jun 2007
Location: Central NC
Posts: 5,868
Default

Cool deal.....what brand prop did you get?
__________________
***************************************

Stay Safe!




Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke.

1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
Reply With Quote
  #7  
Unread 05-27-2008, 08:34 AM
snoozer snoozer is offline
Member
 
Join Date: May 2006
Location: Marathon
Posts: 65
Send a message via ICQ to snoozer
Default

I got it right from the Suzuki dealer, $370.
Now I got a spare. I like the boat better with this one eventhough it takes longer to get up on plane. I don't do hole shots, so it's no big deal.
Wot is somewhere in the middle 5000's. I didn't get a chance to get a long enough run at it the other day, to tell exactly.
__________________
The people should never have to fear their Government, The Government should always fear the people.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:45 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.