Prop Id

[macojoe]

Hi Guys,I need to identify my prop?I have i/o circa 1977/78.It is not on splines,just held on buy large sheer pin followed by end cap and split pin.Markings on prop are illegable.I have tried omc sites but no luck,thanks.Surely someone knows?Badly stuck Irishman.P.S Where is a good place to get deck fittings etc reasonably priced{web sites} in the US?
Regards Brian

genesis08 prop id
Whats that suppose to mean?Please if you have nothing sensible to contribute to my question"say nothing at all".Someday you might be stuck!!!

What that means is that the description you gave is not very good. A picture would tell us all what we need to know!! And deck fittings?? What ones?? There are tons of hardware and fittings on these boats!!

Yes you were a bit over the top with that response!! We have all been stuck, and the replays aren't always what we want to here, but they all lead to a fix at some point!!

[nipper]

Welcome to the site Genesis08. Guys here are crazy about getting pictures just because we all like to see each other's boats. In this instance, Randlemanboater was asking for a picture only out of a desire to help identify your propellor. If you can, please post a picture of the prop and I think you will be amazed at the information you will get in response. If you are stuck, this is the place to be. If the folks on the site are not able to identify your specific prop, I am sure they can recommend what would be a good replacement.

Not aware of any good sites for fittings in particular.

Welcome and have a pleasant day.

[chumbucket]

Sounds like an old electric shift OMC outdrive. Very difficult to get parts for now. They've been out of production for quite some time. We used to call the "White elephants" because of that. It's probably a 14" diameter without much pitch to it. My guess would be 14", 15", or 16" pitch.

[parishht]

Not to be a nudge, but I think we can let him go on the "what's that supposed to mean",
he is Irish.

Anyway, welcome to the site and yes a picture is worth 1000 words.
also if possible put a ruler in the picture.

As far as fittings, pictures of what you need will go a long way as well.
A lot of the members have fittings laying around that they will
send to you for price of shipping.
OR,
watch e-bay.

[genesis08]

Hi Guys,

Thanks for your prompt reply,I will post photo of prop and boat pictures asap.With regard to randleman I just did not understand his comment,appolygies for my reaction.Brian......

[nipper]

Wow, Genesis08, cool to see you are in Cork, Ireland. There must be V's everywhere!

[genesis08]

Thanks Nipper,

As far as I know I have the only one.I have never seen any others.Have you been over here?..........P.S I will get photos of prop soon,I am away at the moment.Will not be back home till next week....Brian....

[bradford]

Don't nobody go and piss off Randleman, He's one of the cooler dudes on this site.

[steplift20]

if you need help these are the guys who will help you
hey they helped me dozens of times
what i would do is take the prop to a marine store in your area and see if they can get the right one pix might not be to good if there are no markings on it i like the web site www.boatfix.com try it if we can help you we will

[randlemanboater]

Originally Posted by genesis08

Hi Guys,

With regard to randleman I just did not understand his comment,appolygies for my reaction.Brian......

No problem.


And thanks to my Posse for having my back.