|
|
#1
|
||||
|
||||
Hatch core repair
Well this one is in regards to the plywood thread. The fuel tank hatch cover was cut in half by a previous owner when replacing the tank. So I had another cover that wasn't cut that needed re-coring. I am by no means a fiberglass guy, and I personally HATE fiberglass work. SO I hope I get it done half way right.
Heres the cover after cutting it apart, even HYDRA-SPORTS used the wood squares.  Here it is after taking a putty knife to it and scraping the old squares out.  All cleaned up with a grinder, and washed it up to remove any residue from the old wood glue.  The piece of wood I got from HOME DEPOT, hope it lasts  . And here it is after a layer of mat, lots of resin(man that old glass was like a sponge), and being tucked in for the night to cure. 
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD  AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 
|
|
#2
04-19-2008, 07:46 AM
|
||||
|
||||
|
looks good ferm it looks like its gonna hold up fine
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#3
04-20-2008, 08:50 PM
|
||||
|
||||
|
Well I went out today and put my 2 layers of cloth over the wood and lettin it set up. Tommorrow I'll go and cut the access holes and put some resin on the exposed wood, and then 5200 my access plates in.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664
|
|
#5
04-20-2008, 09:38 PM
|
||||
|
||||
|
I hope she holds up for awhile. I know it is pretty sturdy. I flipped it over and bounced on it and it didn't move ANY. I learned more about fiberglass work than I EVER wanted to know.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664
|
|
#7
04-20-2008, 10:30 PM
|
||||
|
||||
|
It will last for as long as you will ever need!! The big problem with most boats Wellcraft included is the scrap wood they used in squares to make the covers. The 1 Solid will last a long time!
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#8
04-21-2008, 08:59 AM
|
|||
|
|||
|
Looks really good. The only thing that you could have done differently was to put a 45 cut along the edge of the plywood. This makes the transition from the wood to the decking easier when working the fiberglass.
|
|
#9
04-21-2008, 06:28 PM
|
||||
|
||||
|
I didn't put a 45 on it, but I did bevel it down quite a bit. It just doesn't look it because of how thick i made the glass in that area since the wood doesn't go all the way out.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664
|
 |
| Thread Tools | |
| Display Modes | |
|
|
The rest is easy!!
Excellent work for a novice
CY 1984 V20 STEP LIFT I/O 470 MERCRUISER Wheeling, WV
Linear Mode
