![]() |
|
#1
|
||||
|
||||
|
Finally got around to installing my new Cannon EasiTroll's
The gunwales were too narrow for a install of the baseplates, I did not like the normal method of dealing with that. Which would be a pedestal mount. Not strong enough in my opinion and would not position them for easy use. So to the workshop we go, picked up some marine aluminum plate, nice and thick, cut to shape, holes marked and drilled ![]() positioned and bolted to pre-selected and marked spots with 1/4x20 stainless bolts and lock nuts and washers, one inch washers under the gunnels to spread the load ![]() Another view ![]() Finished mounting, nice units ![]() Did full service, plugs oil filters lower units water sep/filters on the Yammi 60 four stroke and the venerable Suzy 9.9 two smoker. A little ring free in the tank and all is set for tommorow going for browns rainbows and lakers in Round Valley Reservoir, hopefully the weather accomodates ![]() OOP's how did this get in here ![]() You all take care and comb your hair Willy
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#2
|
||||
|
||||
|
Nice Job There Mr. Bill!!!!
How many cases of that "deep drilling " lube have ya gone thru?? |
|
#3
|
||||
|
||||
|
I prefer to get them well lubed before I probe my friend. Thanks
Oh almost forgot used a zinc-chromate based finish on the aluminum to keep the plates from pitting when I hit the salt with the G Spot.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#4
|
|||
|
|||
|
Willy:
Nice job there! Just one question. I see that the outriggers and the motors on your new rig aren't camo? Won't the fish see you sneaking up on them? ![]() Kamikaze
__________________
74 V20 CC with a 150 Johnson (Gone but not forgotten) 89 V20 Cutty with a Tower (Build in process) |
|
#5
|
||||
|
||||
|
Great job !!!!!!!!!!!!
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#6
|
||||
|
||||
|
Thanks guys, I mounted them so that I can work them from the back seat while using the tiller with the 9.9 which is what is required at the lake.
And Kami been thinking about that, I will tell you with the water clarity at the reservoir ( you can see the bottom clearly to about 40 feet ) the camo is actually pretty good. I have had big browns swim right below me and not pay me any mind, I guess cause there is no reflective or refractive light off the boat. but the engines are both grey so I am not worrying about it. Besides with my angry white man face I am the most reflective thing out there.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#7
|
||||
|
||||
|
Looks like I will be fishing in some strong winds today so wish me luck
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#8
|
||||
|
||||
|
well the sun is up for a change but the trees are bent over with winds, going to wait it out till this afternoon and take my son when he comes home from school, hopefully they will lie down by then
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW |
|
#9
|
||||
|
||||
|
Nice riggers Willy. And as usual, installed the RIGHT way. Looks to be a great setup. I'd like to have a pair of those for the Blue Runner for the stripas and deep trolling the king macks.
__________________
1994 Wellcraft V21 |
![]() |
| Thread Tools | |
| Display Modes | |
|
|