![]() |
|
|
|
#1
|
||||
|
||||
|
Only thing I would do different is put the 1000 below!! You can get he water off deck by driving, scuppers leak out, bucket if you have to, but if you get a lot of water below, or crack the hull you will want to get the water out from below faster then a 500 will.
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#2
|
||||
|
||||
|
MJ, I was thinking the same thing, but read since there is only a litle area to keep dry the best bet is to use the smaller pump. the smaller pump will of coarse have a smaller hose ans less back wash from when the bilge shutts down. This will enable the bilge area to drain as much as possible and stay drier. (not sure if that just made sense)
__________________
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|