Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General

Reply
 
Thread Tools Display Modes
  #1  
Unread 03-23-2008, 08:43 PM
garagenc's Avatar
garagenc garagenc is offline
God
 
Join Date: Sep 2006
Location: Camden NC
Posts: 1,782
Default

I have one boat I keep in the water all summer and I have brackish water here also. I run the boat every couple of weeks and then once every 2-3 months I clean the hull (in the water) with toilet bowl cleaner (any cheap one will do). Just don't get it on any stickers because it will remove the shine from the stickers. I had a buddy that had a SEAPRO and he called them to ask what to clean the hull with and they recommended Toilet bowl cleaner.

It does a really good job, I've been using it for 5 years now. I use it on a aluminum boat I have also.
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!!

1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson
Reply With Quote
  #2  
Unread 03-24-2008, 06:54 AM
bcmarinamanager's Avatar
bcmarinamanager bcmarinamanager is offline
Senior Member
 
Join Date: Mar 2007
Location: Wilmington, NC
Posts: 300
Send a message via ICQ to bcmarinamanager
Default

I'm on a brackish water creek at my marina too. Mine had already been painted when I bought it, but a light sanding is usually enough for new bottoms to take paint. I wouldn't worry about keeping it in the water as far as sinking or anything. Unless you have storms everyday, you shouldn't worry about sinking, and you SHOULD already know if you have a leak in the boat anyway. The only worry to have is theft. Don't leave anything of value on the boat...especially the keys (duh). Also, I don't know of any bottom paint that will affect transducers. However, you will need a special spray paint for the lower unit, or a special primer for use with regular bottom paint. (if it doesn't come out of the water all the way) Also used on the engine mount. As for the kind or brand of paint, I use the cheapest ablative I can find, either West Marine brand or Boaters World brand. You might need three quarts for a first time application, I use a little more than a quart and a half to do two coats on mine. If you use the boat as much as you say, then you might could get by with only painting it every other year like me :) . And if you are really concerned about you rbilge pump running down your battery, you can just plug in a trickle charger at the dock. Most wet slips usually have a shore power connection. I personally LOVE having mine in the water. Whenever I get the urge to get on the water all I have to do is jump in and hall a#! It is great! And one more thing about dock lines, all you need is four lines and you're golden. A bow and stern line and a forward and aft spring. If the cleats are secure it won't go anywhere. Just remember yachts do it everynight and they weigh a helluva lot more than we do. Don't woory about the corrosioneither, if everything on your boat is bonded right your zincs will handle that. Not to mention that price is PHENOMINAL!!!!!!!!! NOTE: This picture is when my bottom was two years old! No barnacles, just creek scum.
__________________
Captain Jon
Reply With Quote
  #3  
Unread 03-25-2008, 09:32 AM
Bygracealone's Avatar
Bygracealone Bygracealone is offline
God
 
Join Date: Feb 2006
Location: Elizabeth, PA
Posts: 1,728
Default

Quote:
Originally Posted by garagenc View Post
I have one boat I keep in the water all summer and I have brackish water here also. I run the boat every couple of weeks and then once every 2-3 months I clean the hull (in the water) with toilet bowl cleaner (any cheap one will do). Just don't get it on any stickers because it will remove the shine from the stickers. I had a buddy that had a SEAPRO and he called them to ask what to clean the hull with and they recommended Toilet bowl cleaner.

It does a really good job, I've been using it for 5 years now. I use it on a aluminum boat I have also.
Garage, what do you mean when you say you clean the boat with toilet cleaner while in the water? I can't picture this...
__________________

1990 Hydrasports 2000cc Vector with 96 200HP Oceanrunner.
Saved by grace alone, through faith alone, in Christ alone
http://www.providencerpchurch.com/
Reply With Quote
  #4  
Unread 03-29-2008, 10:09 AM
garagenc's Avatar
garagenc garagenc is offline
God
 
Join Date: Sep 2006
Location: Camden NC
Posts: 1,782
Default

Quote:
Originally Posted by Bygracealone View Post
Garage, what do you mean when you say you clean the boat with toilet cleaner while in the water? I can't picture this...
I wet a sponge with it and crawl around the boat wiping the hull, I put on my snorkel and clean the bottom. With the sponge dipped in bucket or squirt it on the sponge the water the boat sits in won't dilute it enought to not make it work.

I usually do it at the place we get out and swim in (shallow water).
__________________
Tis better to be quiet and thought a fool than open your mouth and prove it!!

1991 V-20 cuddy I/O 350 volvo duo prop, 1998 15ft Grumman 9.9 Johnson
Reply With Quote
  #5  
Unread 03-29-2008, 12:17 PM
whale's Avatar
whale whale is offline
Senior Member
 
Join Date: Jul 2007
Location: Mystic, CT
Posts: 390
Default

Personally, my boat would not get used half as much as I did last year if I did not have a slip. For that price you should consider yourself extremely fortunate to have the opportunity....and that close to your home....consider yourself blessed! Mine is $950 and that is due to the bridge restriction that I go under for one.....most in my area are $1800 and up....

I bought a gallon of paint last year and will have enough to do it twice.
__________________
Old School
1985 V20 cuddy, 1999 Johnson 115 Armstrong Bracket
Reply With Quote
  #6  
Unread 03-29-2008, 12:35 PM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default

around here it usually 12 per foot, per month on an anual contract, with a 30 ft minimum
Reply With Quote
  #7  
Unread 03-29-2008, 01:19 PM
bcmarinamanager's Avatar
bcmarinamanager bcmarinamanager is offline
Senior Member
 
Join Date: Mar 2007
Location: Wilmington, NC
Posts: 300
Send a message via ICQ to bcmarinamanager
Default

At my marina it's $17/ft/month. A 22' slip (the size needed for a 20' boat) is $374 a month, but we require a year lease which equals $4,488 for the year. You are very fortunate.
__________________
Captain Jon
Reply With Quote
  #8  
Unread 03-29-2008, 08:29 PM
rb437's Avatar
rb437 rb437 is offline
Senior Member
 
Join Date: Sep 2004
Location: Annapolis, MD
Posts: 688
Default

Quote:
Originally Posted by bcmarinamanager View Post
At my marina it's $17/ft/month. A 22' slip (the size needed for a 20' boat) is $374 a month, but we require a year lease which equals $4,488 for the year. You are very fortunate.
Don't I know it! Slip around here are similarly priced. Local marinas here would get about $2000 for a boatel and about $1200 for trailer storage with the use of a ramp. $210.00 a year is like free to me. I couldn't buy a slip for that.

I think this is the paint I'm going to try, in a week it will be on sale for $159.00.

http://www.westmarine.com/webapp/wcs...9&classNum=229
__________________
Formerly - 89 cuddy 165hp I/O and 95 V21 / 150 Honda

When the people fear their government, there is tyranny; when the government fears the people, there is liberty. - Thomas Jefferson
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:43 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.