|
|
|
|
#1
|
||||
|
||||
I know some manufacturers use pvc tubing for wire runs bow to stern, but they would not run them along the keel area would they?
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW 
|
|
#2
02-15-2008, 07:50 PM
|
||||
|
||||
|
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#3
02-15-2008, 08:02 PM
|
||||
|
||||
|
Lumber that pipe is a water passage for water to flow from bow to stern. I'm pretty sure it was sealed up pretty tight on both ends so water could not come in contact with the tank. We had a problem in our V like that. The water would just sit up front and verry slowly piddle down to the stern when we We drilled two four inch holes in the livewell and using a water hose to loosed up the crud we was able to pull all the cloggings out, It hasn't given us a probelm since.
__________________
1983 V-20 capsized. . . . in the garage.
|
|
#4
02-15-2008, 08:17 PM
|
||||
|
||||
|
Iam thinkin Iam gonna paint the inside of this with some epoxy paint or something to seal the area
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
|
#5
02-15-2008, 08:37 PM
|
||||
|
||||
|
I'm sure you've double checked, but is 2" taller gonna fit?
Funny, after thisafternoon, my helm looks zackally like yours... 
__________________
Airslot Airslot's V-20 Gallery
|
|
#6
02-15-2008, 09:14 PM
|
||||
|
||||
|
Quote:
yepper , with the old tank there was about 6-8 inches from top of tank to top of deck 
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
|
#7
02-15-2008, 09:15 PM
|
||||
|
||||
|
air can you get us some pics????
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
|
#8
02-16-2008, 07:57 PM
|
||||
|
||||
|
WOW!!
Better you than me ol buddy!! 
|
|
#9
02-18-2008, 08:32 AM
|
||||
|
||||
|
Lumber, how's it going? I've got to download some pics, but as for progress...the helm is in, and the hydraulic lines are hooked to the helm and run to the stern. I was supposed to finish today, but it looks like it may rain all day?
I'm not real satisfied with my helm mounting position. I front mounted mine, as per the instrucutions...it puts the steering wheel a good 2" closer to you. I may have to move the seat back to regain some room. Either that, or look at t a rear mount helm. Not sure what I'm gonna do just yet. On a side note...I knew there was a good chance that a fuel tank was in my future. The only time I ever got a wiff of fumes was when I filled up. Well, in order to make it easier to run the hyraulic lines, I removed the rod box on that side, and what did I find...my vent line laying in the bottom. Seems the fitting had rotted and fallen apart. Now it looks like I need a $10 fitting instead of a tank. Glad I did this steering job...saved me a pile of money...
__________________
Airslot Airslot's V-20 Gallery
|
|
#10
02-18-2008, 09:16 AM
|
||||
|
||||
|
Quote:
__________________
 1994 Wellcraft V21
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
