|
|
#1
|
||||
|
||||
New Pic Posted
Seabird reminded me that I had an empty gallery sitting out there (thanks Mr. Bird).
So, I decided to do something about it. This was a before picture. I hadn't cleaned the boat at all. Since then I've cleaned her up a little and I'm in the process of putting new springs, tires, and rims on the trailer. More pics to come.... Blue
__________________
 1994 Wellcraft V21 
|
|
#2
10-06-2004, 09:46 AM
|
||||
|
||||
|
Re: New Pic Posted
She looks good, Runner. Keep the pics coming!
|
|
#3
10-06-2004, 12:13 PM
|
||||
|
||||
|
Re: New Pic Posted
Did you ever get it running?? I had the same engin in mine when I got it.
I can only say one thing, save time and money and go BRACKET young man!! 
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#4
10-07-2004, 03:32 PM
|
||||
|
||||
|
Re: New Pic Posted
MJ, I think you've got me confused. My boat has the 2 gas guzzling, too heavy, overpowered, half-worn out, twin Johnson 140 outboards.
Wish I did have the I/O hull. Then I could say I had somethin! I dropped the lower on one of the motors to put in a new water pump and I still can't get the darn thing back on. I made a support out of wood yesterday so that I could put a hand jack under the lower unit to hold the weight whilst I try to line things up. Hope it works. The other motor needs a starter and a solenoid. I'll get to that if I can ever get this lower unit back on!! Blue
__________________
1994 Wellcraft V21
|
|
#5
10-07-2004, 04:31 PM
|
||||
|
||||
|
Re: New Pic Posted
:-[ I guess I do have things messed up!!
When I did my old 1974 Johnson I had a hard time getting the leg back on also. I had to turn the prop so that the shaft would line up with the hole?? Also the hoses for the water flow have to belined up also. Good luck!!
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
