Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   General (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=10)
-   -   New Pic Posted (https://forums.wmpdevserver1.com/community/showthread.php?t=4537)

Blue_Runner 10-05-2004 03:49 PM

New Pic Posted
 
Seabird reminded me that I had an empty gallery sitting out there (thanks Mr. Bird).

So, I decided to do something about it. This was a before picture. I hadn't cleaned the boat at all.

Since then I've cleaned her up a little and I'm in the process of putting new springs, tires, and rims on the trailer.

More pics to come....

Blue

Pipe_Dream 10-06-2004 09:46 AM

Re: New Pic Posted
 
She looks good, Runner. Keep the pics coming!

macojoe 10-06-2004 12:13 PM

Re: New Pic Posted
 
Did you ever get it running?? I had the same engin in mine when I got it.
I can only say one thing, save time and money and go BRACKET young man!!



http://img.photobucket.com/albums/v131/macojoe/aer.jpg

Blue_Runner 10-07-2004 03:32 PM

Re: New Pic Posted
 
MJ, I think you've got me confused. My boat has the 2 gas guzzling, too heavy, overpowered, half-worn out, twin Johnson 140 outboards.

Wish I did have the I/O hull. Then I could say I had somethin!

I dropped the lower on one of the motors to put in a new water pump and I still can't get the darn thing back on. I made a support out of wood yesterday so that I could put a hand jack under the lower unit to hold the weight whilst I try to line things up. Hope it works.

The other motor needs a starter and a solenoid. I'll get to that if I can ever get this lower unit back on!!

Blue

macojoe 10-07-2004 04:31 PM

Re: New Pic Posted
 
:-[ I guess I do have things messed up!!

When I did my old 1974 Johnson I had a hard time getting the leg back on also. I had to turn the prop so that the shaft would line up with the hole?? Also the hoses for the water flow have to belined up also.

Good luck!!


All times are GMT -5. The time now is 06:36 AM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.