Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General
Register FAQ Community Calendar Today's Posts Search

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Unread 07-27-2016, 02:48 PM
kamikaze kamikaze is offline
Senior Member
 
Join Date: Oct 2005
Location: Fredericksburg, VA
Posts: 359
Send a message via ICQ to kamikaze
Default

jvitiel

Yes, there is a bulkhead forward and aft in the fuel tank area. There is more up room up front than there is back back aft if you look at the fuel tank compartment from above. The stringers/fuel tank area - side walls go all the way up to the floor. Access from the Stbd Rod box provides more sight to the foam than from inside the fuel tank area if I remember correctly.

Have you thought about adding a access hatch under the port live well? If you pull the Port rod box you can see the plywood tray already in place when you look back there similar to what on the Stbd side already ( at least in mine there is) I need to verify clearance, but by eye it looked to me like a could get a battery in there assuming there is enough separation in height between the deck and the bottom of the live well to cut in a hatch with sufficient height for a battery ( if you use a AGM battery you can turn it on its side reducing access clearance even more). At least this would separate the battery weight so its not all on one side. while maintain the fish box, a requirement in mine :-)


Kamikaze
Kamikaze
__________________

74 V20 CC with a 150 Johnson (Gone but not forgotten)
89 V20 Cutty with a Tower (Build in process)
Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:28 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.