Suzuki Tilt and trim

[Boston Habba]

2006 DF 140

Tilt up doesn't work. Both the switch on the binnacle and the cowling. Try to trim up from either gives nothing. Press down and trim motor runs. I have assumed that both switches haven't gone bad at the same time.

It has a single combined up/down relay. Clicks when down is pressed. Nothing when up is pressed. Assumed that the problem was in the relay. New relay didn't solve problem. There is a switch that limits up travel but I have eliminated that as a cause.

Any other Suzuki owner have the same problem? Any ideas?

Thanks