really thats an easy fix.remove it,clean & rough up the plastic from the back.cut wax paper bigger than the hole.wet the paper with resin & cover it with fiberglass cloth,lay it over the hole from the back & tape the edges in place.let it cure.remove the paper & now cut cloth to fit in the hole from the front,rough up the resin & wet it out & lay the cloth in & keep building till you reach the level of the plastic.sand & paint the boxes.done.I did a lot of repairs on mine.lots of fiberglass how to on youtube.
|
05-09-2010, 05:22 PM
Threaded Mode