I took a 5 gallon bucket and first cut out a door in the top and added a hing. I then drilled an upper hole which I screwed in a 90 degree brass fitting which I attached a hose which ran down the side of the bucket. I used another 90 degree brass fittinng which turned it out with another hose that could fit through my rear floor drain which runs into my splash well. I also drilled another hole on the other side of the bucket which I attached a nipple for a quick release hose fitting. When I need a live well I just snape the hose to my wash down to the bucket and throw on the switch and it works great. I did have to add a peice to the hose from the pump so I could control the water flow.
|
03-04-2009, 03:59 PM
Threaded Mode