Well I don't know how patient you are but from personal experience you dont want to have anything to do with that tilt unit. Maybe try to find a cheap used one. I have a 99 johnson and have had to replace the little things and it was very very tedious and took me a couple of weeks. I couldnt get the plugs out to get into the unit. (and you can't heat much them either aluminum on aluminum will just become a distorted mess.) I was able to get one out using a small chisel and turning it backwards after drilling it. then the other one I had to completely drill out and retap the hole. That wouldn't have been a big deal if it was a standard size tap but it had to be ordered and cost $35 and it had to be filled too. Also the little things that I replaced on mine could only be obtained from the dealer and it cost me $50 for the two specialty screws i had to remove plus i had to get all the little parts and seals that i was replacing in the first place. By that time i could have found a used one. Maybe you would have better luck thats jut what happened to me.
|
04-14-2008, 08:25 PM
Threaded Mode