|
|
#11
|
||||
|
||||
Re: Fiberglass repairs
i went 4 inches on mine inside and out
__________________
 1978 V20 Cuddy w/ 225 Johnson. And Several other boat's 
|
|
#12
04-10-2007, 11:01 PM
|
||||
|
||||
|
Re: Fiberglass repairs
Quote:
Skools, we didnt need to know all that info...we are talking about transom caps here, you pervert! ::)
__________________
Really, who ISNT better looking than Charlie?
|
|
#14
04-22-2007, 02:05 AM
|
||||
|
||||
|
Re: Fiberglass repairs
Mac can ya tell how deep the gap between outter and inner hull?...seems to me, if you glass over a void, it'll just recrack sooner or later...fill the gap w/ something...I'd think pourin' it up w/Seacast would do it...but don't leave it open and just glass over... :D ...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#15
04-22-2007, 03:10 AM
|
||||
|
||||
|
Re: Fiberglass repairs
Have any of you used Bondo to fill in voids ?? Then glass over that ?? A friend told me that yesterday and i find that hard to believe. He said Marine Tex and Bondo are identical except Marine Tex has fibers in it to make it a little stronger. Any truth ?? Didnt mean to derail this thread.
Scott
|
|
#16
04-22-2007, 09:24 PM
|
||||
|
||||
|
Re: Fiberglass repairs
Parrot the guy at our fiberglass shop said you can use Bondo to fill. *At work we have a composite dept, the guy there recomended using the epoxy resin with chopped fiber glass fiber for a little more strength along with the hardener. *The strength here comes from the resin and matting, right Stinky, Skools? *
Reel there was not too big of an unfilled gap, only a crack. *Wellcraft either put a bed of filler down before setting the liner in or they reely pushed the filler way back in there. * I've added more photo to the very first post to show the steps I'm taking. * Billy Mac *;D
__________________
 Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug
|
|
#17
04-22-2007, 10:39 PM
|
||||
|
||||
|
Re: Fiberglass repairs
parrot , your friend is 100% rite , here on lbi we fiberglass our decks on these houses we build and they use bondo before they glass works like a champ....
__________________
1987 Dual Console / 2007 200 hp E-Tec 
|
|
#18
04-22-2007, 10:41 PM
|
||||
|
||||
|
Re: Fiberglass repairs
heres one we just did not long ago
 
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
|
#19
04-22-2007, 10:44 PM
|
||||
|
||||
|
Re: Fiberglass repairs
these guys are doing bondo on all the seams in the plywood and nail holes,,,,, take note that all this plywood is pre coated with a fiberglass resin before its laid and theses guys get about 10 to 12 dollars a square foot to do this...... this house had about 25,000.00 dollars worth of glass work done.
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
|
#20
04-22-2007, 10:53 PM
|
||||
|
||||
Re: Fiberglass repairs
  
__________________
1987 Dual Console / 2007 200 hp E-Tec
|
 |
|
|
Linear Mode
