|
|
#1
|
||||
|
||||
1992 V20 factory Livewell repair
my 92 V20 came with a factory livewell mounted under a lid in the stern. Am in need of a couple of replacement parts.
There is supposed to be a highspeed pickup that is used to fill/aerate the livewell while the boat is moving. The flow is controlled by moving a lever mounted on the inside of the port the gunwale. Moving the lever changes the position of the pickup at the stern which adjusts the flow. Trouble is, the cable ( more like a piece of stiff wire) is broken and the pickup is missing. Any thoughts out there on a source would be appreciated- am trying to get this baby back to factory original. Thanks for any and all suggestions. 
|
|
#2
10-03-2007, 10:49 AM
|
|||
|
|||
|
Re: 1992 V20 factory Livewell repair
Wish I could help, the only thing I know to do is replace with a bronze pickup with a valve on the inside.
http://www.westmarine.com/webapp/wcs...p;classNum=217 http://www.westmarine.com/webapp/wcs...p;classNum=217
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
 |
|
|
Linear Mode
