New V-20 Project, Questions...

Here's the deal- bought a V-20 hull in good shape. Needs work, but just with wood/wiring/fuel tank. I have a serial number- is there a decoder out there for Wellcraft?

Also- any good sources for a complete windshield assembly?

[Skools Out]

email Marsha at Wellcraft here's her email address she can help you out on all you want to know most likely.

[email protected]

Excellent- thanks. I'll get some pictures later today. Long story short- saw a V-20 hull with a 90-something Merc outboard sitting on a trailer next to the road, called and offered $500 and the next thing I know I'm praying to god the trailer is roadworthy.

[Skools Out]

Sounds like a great find / deal if the hull is solid. We'll be awaiting the pictures. Welcome to the Board B4B

Just decoded the O/B serial- it's a 86 Merc 200HP V6 ELPTO. Both the heads are off and the powerhead cover is missing, but it's clean and the lower unit is without a scratch. Looks like they ran out of oil and scored a cylinder wall on #1. Steering looks like they converted from OMC to Merc.

I can deal with a rebuild a bore job! I wonder how hard it's going to be to find a cover...

Looking at the hull closer- the stern is solid, no patchwork, fuel tank has an interesting arrangment (using tank in the starboard gunwale?), missing windshield, no gauges in console, has the two swivel seats, etc.

I'll definitely get some pictures tomorrow.

[Skools Out]

Look on ebay for a Hood or Upper Cowling. Check on ebay it may be cheaper to buy a new power head off there than to rebuild yours.

[reelapeelin]

Bunk, are you saying your boat has fuel tank under starboard gunwale only...posed to be one on each side... :)...

[shicks007]

Did I miss it, what year is the boat?

[Skools Out]

What's the HIN number or the boat?