![]() |
|
#1
|
||||
|
||||
|
How much paint are you using on your bottom if you paint at all? I have a quart of micron and was trying to figure out if I need more.
|
|
#2
|
||||
|
||||
|
about 3/4 gal or a little less for one coat.
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#3
|
|||
|
|||
|
A quart will do it if you thin it about 50%. I know people who do this, but I have to wonder what that does to the anti-fouling properties. I use two quarts of bottom paint mixed with 1/2 pint of thinner and this comes out just right for me. If you use thinner, don't use the solvent based type that is intended for spraying; this will make it dry too fast when brushing or rolling. Use the type that extends drying time like Interlux brush ease or a product called Penetrol.
|
|
#4
|
|||
|
|||
|
I used about 1/2 of a gallon last spring - no thinner and done on trailer.
__________________
1984 248 Sportsman w/1999 5.7L EFI Mercruiser 2001 Carolina Skiff J16 w/2005 25hp Yamaha tiller control |
![]() |
| Thread Tools | |
| Display Modes | |
|
|