|
|
|
|
#1
|
||||
|
||||
Tachometer Trouble...
I am adding a tach to my V20 but can't find the harness. The boat was rigged with only a voltmeter and a fuel tank meter. Where are the wires for the Tach? The motor is a 2000 Johnson 150 and the tach is a teleflex combo unit, Tach and System check. Any help would be appreciated. Thanks.
-Svence
__________________
1984 V-20 Steplift 1998 Johnson 175 
|
|
#2
04-23-2008, 10:46 PM
|
|||
|
|||
|
I Have a Johnson and the tach wires are integrated with the system check wires because they are the same gauge. I think the wire you need is rectangular and it should be in the engine harness.
This may help http://www.whalercentral.com/images/...ng_Harness.jpg
|
|
#4
04-24-2008, 07:18 AM
|
||||
|
||||
|
I think I may need an entirely new harness as I am either missing or can't find all the harnesses. I am assuming the boat was rigged with an 84 (year of the hull) prior to repowering to the 2000 and when they repowered I think they used the old harness. So I think I need a post 1996 johnson harness...anyone have one lying around???
-Svence
__________________
1984 V-20 Steplift 1998 Johnson 175
|
|
#5
04-24-2008, 08:12 PM
|
||||
|
||||
|
What does the plug on the engine look like? They may have used the adapter and retained the old harness. If so you'll need the newer harness for the system check guage to work properly.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD  AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 
|
|
#6
04-25-2008, 10:47 AM
|
|||
|
|||
|
Update
Please check this link, Check under Tach for your wire colors I found this to be very useful during my re-wiring project http://www.outboardmotor.biz/
|
 |
|
|
Hybrid Mode
