|
|
|
|
#1
|
||||
|
||||
Transducer replacement
What would I use to fill screw holes that will be under water. I'm installing my new FF and transd and paddle wheel. thanks Billy Mac ;D
__________________
 Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug 
|
|
#2
03-31-2007, 11:29 AM
|
||||
|
||||
|
Transducer replacement
What would I use to fill screw holes that will be under water. I'm installing my new FF and transd and paddle wheel. thanks Billy Mac ;D
__________________
Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug
|
|
#3
03-31-2007, 03:31 PM
|
||||
|
||||
|
Re: Transducer replacement
small holes like that can be done a few ways.
#1 and best way, Formula 27, fill and sand, Marine Tex will also be fine!! #2 Take a Golf T put in resin hamer into the hole, let dry, cut end off. Great to fix screw holes in deck also! #3. 5200 will work fine. (make sure to put 5200 on new screws)
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#4
03-31-2007, 03:31 PM
|
||||
|
||||
|
Re: Transducer replacement
small holes like that can be done a few ways.
#1 and best way, Formula 27, fill and sand, Marine Tex will also be fine!! #2 Take a Golf T put in resin hamer into the hole, let dry, cut end off. Great to fix screw holes in deck also! #3. 5200 will work fine. (make sure to put 5200 on new screws)
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#5
03-31-2007, 11:29 AM
|
||||
|
||||
|
Transducer replacement
What would I use to fill screw holes that will be under water. I'm installing my new FF and transd and paddle wheel. thanks Billy Mac ;D
__________________
Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug
|
|
#6
03-31-2007, 03:31 PM
|
||||
|
||||
|
Re: Transducer replacement
small holes like that can be done a few ways.
#1 and best way, Formula 27, fill and sand, Marine Tex will also be fine!! #2 Take a Golf T put in resin hamer into the hole, let dry, cut end off. Great to fix screw holes in deck also! #3. 5200 will work fine. (make sure to put 5200 on new screws)
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#7
03-31-2007, 03:37 PM
|
||||
|
||||
|
Re: Transducer replacement
Formula 27 or marine tex? I have some marine tex. West marine carries F27 I assume? Thanks MJ Billy Mac ;D
__________________
Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug
|
|
#8
03-31-2007, 04:03 PM
|
||||
|
||||
|
Re: Transducer replacement
use what you have!! Marine tex is perfect if thats what you have on hand!! F27 is very were Boaters world, hardware stores ect ect..
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#10
03-31-2007, 08:37 PM
|
|||
|
|||
|
Re: Transducer replacementt
Don't forget, immediately after applying two part epoxy such as Marine Tex, wet it (water or spit works best) and smooth out the repair to avoid lots of sanding.
|
 |
|
|
Hybrid Mode
