|
|
|
|
#1
|
||||
|
||||
Cold nights ahead
I am not planning on fully winterizing the boat until at least Dec 1st, Black Fish are fun ;D.
Are there any steps I should be taking with my engine/boat to get through the freezing nights until then? I figured I would pour some antifreeze into the hatches and bilge area to prevent freezing, but not sure if I should be doing anything else. Thanks!
__________________
|
|
#4
10-17-2006, 11:31 AM
|
||||
|
||||
|
Re: Cold nights ahead
I don't think it's necessary to put anti-freeze in hatches and such. Do they ever totally fill w/water?
What state do you live in?
__________________
http://img.photobucket.com/albums/v2...tz/captain.gifhttp://img.photobucket.com/albums/v2.../2sharkfin.gif&&&&SOMEWHERE IN TEXAS A VILLAGE IS MISSING THEIR IDIOT!
|
|
#6
10-17-2006, 12:31 PM
|
||||
|
||||
|
Re: Cold nights ahead
Quote:
My wife tells me that often. ::)
__________________
Really, who ISNT better looking than Charlie?
|
|
#7
10-17-2006, 12:40 PM
|
||||
|
||||
|
Re: Cold nights ahead
do you keep her in the water or on the trailer? in the water i would say maybe a little antifreeze in the bilge, on the trailer keep her tilted back and the plug out ;D
__________________
 CY 1984 V20 STEP LIFT I/O 470 MERCRUISER Wheeling, WV
|
|
#8
10-17-2006, 01:19 PM
|
||||
|
||||
|
Re: Cold nights ahead
....what Cy said and tilt the motor down too. If you leave it up water can hold in the lower unit and freeze.
__________________
 1994 Wellcraft V21
|
|
#9
10-17-2006, 02:37 PM
|
||||
|
||||
|
Re: Cold nights ahead
Quote:
I 2nd all said above and emphasize BR's suggestion...tilt boat up so it drains, then nothing to puddle...and tilt motor down after each use to drain thoroughly and store w/ motor tilted down also...been following this for years w/ no problem... ;) :D ...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#10
10-17-2006, 04:34 PM
|
||||
|
||||
|
Re: Cold nights ahead
Good advice on lowering your motor. When I bought mine the owner had the motor raised so that he could raise the front end higher. Water stayed in the water pump and froze. I had to replace all of the pumps components. Once you have your motor lowered turn it over quickly, don't start, this will help expell any remaining water.
Winterizing an Evinrude E tec, 3 quick turns of the key and your winterized! Billy Mac ;D
__________________
 Now being pushed with the Force of an E-Tec! http://www.wellcraftv20.com/gallery/...1990-V20-Sport http://www.youtube.com/watch?v=9ESnJm4uxug
|
 |
|
|
Hybrid Mode
