Boat wax?

[oteps]

What do you use? Was thinking of waxing it to keep it from getting dirty and yellow below the water line. Anything else easier than wax?

[Giorgio]

When I had my boat, I used Collinite fiberglass heavy duty cleaner (920), their marine wax (925), then their high gloss sealant (925). If I had a lot of slime, green, rust stains or brown crap on the hull or along the sides, I would use On-Off FIRST, be careful it's ACID, DO NOT SMELL IT, I did and almost passed out, it will not hurt the gelcoat. I suggested these products to my other boating friends, they liked it also. Again, it's just my lousy opinion.
G

[oteps]

Might buy a polisher. I don't have the time or patience to do it by hand!

[steplift20]

My friend gave me a bottle of woodywax so I tried it.
Went on YouTube to see how it ;s applied.
1st step wash your boat
2 nd spray it on and spread it with a soft deck brush ( dont dry your hull,leave it wet)
3rd let it dry,walk away that s it.
I did it and it looks good,don5 know how it works but it does
Check it out on YouTube. Very easy ,I like that
Its expensive but works and easy

[phatdaddy]

u guys got me interested, after 30 years, I might need to wax mine.

[steplift20]

Phatdaddy I waxed m6boat all the time,it’s a lot of work but if you get a color restorerer for gel coat it works well. The woody wax I was talking about is very easy and looks good expensive but I think you will hav3 to first a gel coat restorerer then after that. Woodywax if you pay a detailed to do your boat ,you will b3 shocked on how nice it comes out.