Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
  #1  
Unread 08-18-2014, 10:35 PM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default need help with a fuel flow problem

i think i have a fuel primer bulb issue. this is on my 13 whaler. when i run at high speed,. the engine will stall out, i can pump the ball and the motor will pick up again. i thought i might have a bad fuel pump, but then i decided to put a gauge on it. with the motor running, i have about 1-2 lbs of positive pressure, so i thought that meant good pump. i then turned the motor off, pumped the ball up until firm, had 5 lbs on the gauge, then noticed the gauge went to 0.

does this mean the check valve in the primer bulb is bad?
if so, would this cause the engine to starve for fuel while running?

it's a moeller, so i'm going to change it anyway, just wondering if i'm on the right track

sorry for the long read,
thanks for any input.
Reply With Quote
  #2  
Unread 08-18-2014, 10:56 PM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default

throw the moeller in the trash can, get a good mercury/Bombardier/Yamaha/ Zuke primer bulb. I use the bomb bulbs on a regular basis. they appear to be the same thing merc is selling. Use good quality fuel line, and eliminate the quick connects if you can, go directly to barb fittings. Don't buy one of those prepackaged fuel line kits, they are junk. Dont forget to check the fuel pick up in your tank if you are using portable tanks, I've seen them swell and get loose at the the fitting inside the tank, I've seen them split as well.
Reply With Quote
  #3  
Unread 08-19-2014, 10:45 AM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

merc bulb seems to have fixed the problem, can pump it up to 5 lbs static and it holds for 20 minutes, other bulb would go to 0 in 15 seconds. going to run it this afternoon & see.

spare , you were right on with the fuel line, inside seems to be separating, going to change it out also.

thanks
Reply With Quote
  #4  
Unread 08-19-2014, 01:36 PM
Destroyer's Avatar
Destroyer Destroyer is offline
God
 
Join Date: Apr 2010
Location: Montville, NJ
Posts: 8,236
Angry

Quote:
Originally Posted by phatdaddy View Post
Spare , you were right on with the fuel line, inside seems to be separating, going to change it out also.

thanks
Ethanol fuel strikes again.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer
1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer
1996 V21 w/1993 200HP Mercury on a Shoreline Trailer
All towed by a 5.7L Hemi Durango.


If God didn't have a purpose for us we wouldn't be here, so
Live simply, Love generously, Care deeply, Speak kindly.
(Leave the rest to God)

Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
Reply With Quote
  #5  
Unread 08-19-2014, 04:05 PM
phatdaddy's Avatar
phatdaddy phatdaddy is offline
God
 
Join Date: Mar 2003
Location: south of I-10
Posts: 4,965
Default

that's the interesting point, d. i've ran nothing but non e in this motor. i'm going to test the next time i fill up. station owner might be pulling a fast one.
Reply With Quote
  #6  
Unread 08-19-2014, 07:20 PM
spareparts's Avatar
spareparts spareparts is offline
God
 
Join Date: Oct 2006
Location: Raleigh, NC
Posts: 6,192
Default

one of the local marinas has had no E gas for at least 5 years. I work there often and have checked their gas more than once. It doesn't have ethanol in it, but its sure got something in it that will burn your skin and still attacks rubber fuel lines. I used to clean parts with gas when i was younger, now this stuff will make your skin burn and turn red almost instantly. Its not E, but it can be just as bad
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:04 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.