|
|
|
|
#1
|
|||
|
|||
Steering Question
Hi all first post here
I just picked up a 73 v20 cuddy with the merc 165hp inline 6, the motor is FWC and runs great,lots of new parts,same with the drive. The boat needs a deck and cosmetics but is useable once I have rewired. I plan on picking away at the boat gradually getting it back to pristine condition. My first question is on the steering, the boat currently has an antiquated rideglide which has a lot of slop in the helm and the wheel is loose and way to big. I am looking to replace the steering to allow a new wheel and improve what is there right now. My only prior experience is with outboards and hydraulic steering. I emailed Teleflex and they recommend rack and pinion either with or without the no feedback depending on how much feedback the current set up gives. I am not putting the boat in the water until the steering is replaced so am not sure how much feedback the 165hp sterndrive gives. Any help would be great,thanks,Liam 
|
|
#3
03-27-2013, 09:14 AM
|
||||
|
||||
|
Completely agree with MJ. No Feedback is the way to go.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God)  Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless.
|
|
#4
03-27-2013, 09:18 AM
|
|||
|
|||
|
If you don't have power steering you definitely what the no feed back.
|
|
#5
03-27-2013, 09:21 AM
|
||||
|
||||
|
What they said....and welcome to the site.
__________________
 1994 Wellcraft V21
|
 |
|
|
Hybrid Mode
