|
|
|
|
#1
|
|||
|
|||
oxidation
my boat is a dull white on the top side i want to make it shiny again what can i do
__________________
I have a 1987 V20 Steplift with a 1987 johnson 140 2 stroke 
|
|
#3
05-01-2012, 05:05 PM
|
||||
|
||||
|
Finishmasters has a very good buffing compound. It is an all in 1 bottle of compound with three buffing pads. Worked better than the 3M system IMO. Start with a good cleaning and then go at it with the high speed with the aggressive pad. Then change pads for medium cut and final polish. Wax afterwards.
__________________
 1996 -19' NV Flats 115 Mercury 4-stroke 1983 -20' Wellcraft Center Console 250 XS
|
|
#4
05-01-2012, 07:32 PM
|
|||
|
|||
|
I use Aquabuff 1000 for most stuff and if you really want to shine Aquabuff 2000.
http://www.aqua-buff.com/ You can't beat it and trust me I've tried them all at least once! You'll need a power buffer though or else you can expect quite a workout. Harbor Freight typically has 7" variable speed sander/buffer that goes on sale for $29.00 around this time every year that works great with a foam buffing pad. With a little effort you can get it will look like a mirror finish again. Kamikaze
__________________
 74 V20 CC with a 150 Johnson (Gone but not forgotten) 89 V20 Cutty with a Tower (Build in process)
|
|
#5
05-09-2012, 01:10 PM
|
||||
|
||||
|
wet sand 800,1000,1500,buff magic,ultimate paint guard plus.
http://www.autogeek.net/ultima-paint-guard-plus.html
|
 |
|
|
Hybrid Mode
