Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > General
Register FAQ Community Calendar Today's Posts Search

Reply
 
Thread Tools Display Modes
  #1  
Unread 11-24-2008, 07:28 PM
phester phester is offline
God
 
Join Date: Mar 2005
Location: L.I. New York,north shore
Posts: 1,791
Send a message via ICQ to phester
Default sad day

it's official, my 2008 v-20 season is over. I took advantage of the "mild" N.Y. temps. [almost 50*]and the wind has finally stopped blowing, so I winterized today. Gas treated, motor fogged, a quick wash, lower unit oil done, set her up on blocks, built the frame for the cover [tarp] and covered her up. I did purchase, from Lumberslinger, a factory Wellcraft winter cover two seasons back. It fits perfectly and it's definitely heavy duty but it tends not to shed any snow load. You just can't pitch the cover high enough. Went w/ the conventional 14x26 blue tarp. This is the earliest that I've winterized.....,I'm usually good right up or around Christmas. The larger bass are gone and any day the blues will follow if not already. Black fishing will remain strong for at least another month but I am not the best black fisherman so I'll just call it quits for this year. Boat ran great all season, I wish I had gotten out more, maybe 11-12 times on the V and 15 or so on the tin boat. Got more fishing done on the tin. It is going to be a long 5 months.
Reply With Quote
  #2  
Unread 11-24-2008, 08:14 PM
macojoe's Avatar
macojoe macojoe is offline
Administrator
 
Join Date: Mar 2003
Location: Carver, Ma.
Posts: 15,859
Send a message via AIM to macojoe Send a message via Yahoo to macojoe
Default

Yep my season is done also. but I have not covered the boat yet. I have to build a frame and all this year as its the first time covering the OX with the hard top and all.
I put gas treatment in the last trip out so I know that it gets all thru the system that way. Just got to fog the motor, change the lower unit oild and I am done.
It was a good and bad season for me, June & July were great!! Best season for Fluke in about 5 years. Bass were also all over the place and in August my buddy's were killing them! But because of my hospital for nearly all of August and recovery time of all September & most of October I missed a huge part of the year! Went out twice for Tuna landing a 150 ponder, to end the season.

Hopeing for a great 2009!!
__________________
1986 V20

Old Fishermen never die, we just SMELL that way!!
Reply With Quote
  #3  
Unread 11-24-2008, 09:14 PM
lumberslinger178's Avatar
lumberslinger178 lumberslinger178 is offline
God
 
Join Date: Oct 2006
Location: long beach Island
Posts: 4,519
Send a message via AIM to lumberslinger178
Default

Good luck with that cover again Pete, My seasons over too I pulled the boat weds of last week, its being winterize and shrink wrapped til april or May. it was a great season for us (wife and Kids) Already jonesing for next yr....
__________________
1987 Dual Console / 2007 200 hp E-Tec

Reply With Quote
  #4  
Unread 11-24-2008, 09:16 PM
Monkey Butler Monkey Butler is offline
Senior Member
 
Join Date: Aug 2005
Location: Central Mass.
Posts: 646
Default

Well, shooting for the first week in May...

From and including: Monday, November 24, 2008
To, but not including : Saturday, May 2, 2009
It is 159 days from the start date to the end date, but not including the end date
Or 5 months, 8 days excluding the end date
Alternative time units

159 days can be converted to one of these units:
  • 13,737,600 seconds
  • 228,960 minutes
  • 3816 hours
  • 22 weeks (rounded down)
Winterizing my motor will consist of putting the powerhead in a big trash bag and the carbs in some zip-loc bags! All of the electricals are in a cardboard box.

My tarp fell down too many times because of puddles in it last winter. I need to come up with a better frame for this winter. I'm thinking of stealing some of this guys ideas:

http://www.reel-time.com/forum/showt...highlight=tarp

unless someone has any better idea.
Reply With Quote
  #5  
Unread 11-25-2008, 03:10 AM
macojoe's Avatar
macojoe macojoe is offline
Administrator
 
Join Date: Mar 2003
Location: Carver, Ma.
Posts: 15,859
Send a message via AIM to macojoe Send a message via Yahoo to macojoe
Default

I tried the pvc thing once, its ok, but not as good as they say. and that pvc starts getting expensive after you start buying stuff!

Beat way I found was to get a bundle of strapping from local HP Or lowes screw pieces together till you have one board from bow rail to transom or motor which ever.
Tie to bow rail go over the widsheild and use a 2x4 at the transom to keep it high. cover and tie down good, I get 3 yeatrs or better from a tarp. Use pices of pipe insulation on windshield frame and any were else that has a sharp corner. you will be fine.
__________________
1986 V20

Old Fishermen never die, we just SMELL that way!!
Reply With Quote
  #6  
Unread 11-25-2008, 08:09 AM
randlemanboater randlemanboater is offline
God
 
Join Date: Jun 2007
Location: Central NC
Posts: 5,868
Default

MJ, just run a rope from the bow to the stern over the hard top and that should hold the cover up.
__________________
***************************************

Stay Safe!




Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke.

1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
Reply With Quote
  #7  
Unread 11-25-2008, 09:21 AM
Stillrunning Stillrunning is offline
Senior Member
 
Join Date: Dec 2006
Location: Suffolk, Va.
Posts: 972
Send a message via ICQ to Stillrunning
Default

Sorry to here that your year is over but that means that ours should really get heated up in the next couple of weeks. I'm in the Va. Beach Va. area and the big stripers are just starting to show up. If its anything like the past couple of years we should have some good fishing into Feb. Thats if we have some mild weather and they stick around alot longer.
Reply With Quote
  #8  
Unread 11-27-2008, 02:12 PM
macojoe's Avatar
macojoe macojoe is offline
Administrator
 
Join Date: Mar 2003
Location: Carver, Ma.
Posts: 15,859
Send a message via AIM to macojoe Send a message via Yahoo to macojoe
Default

Ok I am all done for another 5 months at least!!



__________________
1986 V20

Old Fishermen never die, we just SMELL that way!!
Reply With Quote
  #9  
Unread 11-30-2008, 11:03 AM
C YENSEN's Avatar
C YENSEN C YENSEN is offline
God
 
Join Date: Sep 2005
Location: Wheeling, WV
Posts: 4,262
Default

Hey MJ check that front, looks like you might get some puddling up there in the bow rail
__________________
C:\Documents and Settings\cyensen.VISTADESIGN\My Documents\My Pictures\boat\DSC00750-a.jpg CY 1984 V20 STEP LIFT I/O 470 MERCRUISER Wheeling, WV
Reply With Quote
  #10  
Unread 11-30-2008, 11:32 AM
macojoe's Avatar
macojoe macojoe is offline
Administrator
 
Join Date: Mar 2003
Location: Carver, Ma.
Posts: 15,859
Send a message via AIM to macojoe Send a message via Yahoo to macojoe
Default

Yes I and CB have talked about it, and I knew that was a weak point, I will fix some kind of pole to lift it up some.
__________________
1986 V20

Old Fishermen never die, we just SMELL that way!!
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:36 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.