|
|
|
|
#2
03-22-2005, 02:58 PM
|
||||
|
||||
Re: CB, Remember my rusted tilt??
Looking good Bud. 50 degrees today! Won't be long! ;D
__________________
Heavily medicated for your protection. 
|
|
#3
03-22-2005, 06:23 PM
|
||||
|
||||
|
Re: CB, Remember my rusted tilt??
Wow a heat wave!!!LOL 80 here today!! ;D
__________________
Really, who ISNT better looking than Charlie?
|
|
#4
03-22-2005, 08:13 PM
|
||||
|
||||
|
Re: CB, Remember my rusted tilt??
All installed and works like a charm!!!! Thats the good news!
The Bad news is that they want like $800 to $900 to LineX the deck of the boat!! :o Nope I not going to spend that much!! >:( So need to figure out what is the best deck paint, epoxy what ever??
__________________
1986 V20  Old Fishermen never die, we just SMELL that way!!
|
|
#5
03-22-2005, 09:27 PM
|
|||
|
|||
|
Re: CB, Remember my rusted tilt??
do it yourself.........60 to 70bucks a gallon at home depot or menards......you get the roller and directions
|
|
#6
03-22-2005, 10:12 PM
|
||||
|
||||
|
Re: CB, Remember my rusted tilt??
Very nice. I just blasted and painted mine also. Did you have any trouble getting it off of the engine? I broke off 2 bolts, tried everything to get them out. Finally had to take it to work, cut them out on the milling machine and helicoil them..shhhhh.
__________________
If your not living on the edge.....your taking up space.
|
|
#7
03-23-2005, 12:25 AM
|
||||
|
||||
|
Re: CB, Remember my rusted tilt??
I was lucky!! I never broke a thing!! It all came off pretty easy.
Except the spliting of the motor mount. It was stuck on the steering tube pretty good. After playing nice for a while, I took a coal chisle and a 3 pound hammer and it came right apart *;D I got it all on today and it works great!! 
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
|
#8
03-24-2005, 12:59 AM
|
|||
|
|||
|
Re: CB, Remember my rusted tilt??
That looks great, is that just clean and repaint? Looks like new.
__________________
1984 V20 Steplift Cuddy Seadrive converted to bracket 1992 175EFI Mariner
|
|
#9
03-24-2005, 01:27 AM
|
||||
|
||||
|
Re: CB, Remember my rusted tilt??
Vic, the pump was solid rust!! flaking off!! and i thought it had rusted thur.
But it did not and is real thick metal there. That is were the armacher (can't spell) spins. So I removed in back in Dec I think and took a grinder with a heavy wire wheel and got all the rust off. Tghen i painted it with 3 coats of ZRC: http://www.zrcworldwide.com/galds.htm Then I cleaned the whole unit with thinner, and put 3 coats of Yamaha paint on the whole thing. I bleed out the whole system and refilled with all new tilt oil. Put new seals on the pistion caps and a new O ring on the fill screw. Works like a charm now!! and i hope it will be rust free for a long time to come!!
__________________
1986 V20 Old Fishermen never die, we just SMELL that way!!
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
