![]() |
|
|
|
#1
|
|||
|
|||
|
I know there crap!
Which is why I need a used powerhead! Looking for a 90s vintage 90HP mercury Sportjet powerhead. I have all the crabs and electronics and dont need those. Thought I would post here and see if anyone might have one they wanted to sell. Thanks Kamikaze
__________________
74 V20 CC with a 150 Johnson (Gone but not forgotten) 89 V20 Cutty with a Tower (Build in process) |
|
#2
|
||||
|
||||
|
I saw a bayliner jazz sport jet that some one had glassed up the hole in the bottom, built a small bracket and mounted a 50 hp outboard on it. I also saw a Searay sport jet that had been repowered with a 3.0 Mercruiser
|
|
#3
|
|||
|
|||
|
Spareparts:
Ill be going the glass route and hang 50 if I cant find one. Got a 15ft hobie-jet center console thats in good shape. Just want to see if there one out there or not before I start chopping away..... Kamikaze
__________________
74 V20 CC with a 150 Johnson (Gone but not forgotten) 89 V20 Cutty with a Tower (Build in process) |
|
#4
|
||||
|
||||
|
i have a customer with a Hobie skiff, he has a 90 Merc on it. I think it may be the next size up from yours
|
|
#5
|
|||
|
|||
|
Does that motor have a different splined crank to run the sport jet like the mercury 175hp 2.5 liter v-6? If not I may have lead on a few.
Brian |
|
#6
|
|||
|
|||
|
Yes, its a different crank/spline configuration. Since there was not response I have already started to cut and glass in order to make it a outboard vice a jet configuration.
Thanks Kamikaze
__________________
74 V20 CC with a 150 Johnson (Gone but not forgotten) 89 V20 Cutty with a Tower (Build in process) |
![]() |
| Thread Tools | |
| Display Modes | |
|
|