Livorsi fuel sending units

[Blu_Lunch]

My boat didn't have a fuel gauge so while the tank was out I tested the sending unit and the gauge worked fine. So I installed the gauge and when I put 30 gallons of fuel it should have gave me a liitle more than a 1/2 of a tank, but when I turned on the key it was less than a 1/8, I checked everything I even reached in with a piece of wire and grabbed the float and the gauge went up. I got POed and pulled the sending unit out and found out the unit is 5 inches short. So off to the boat parts suppler and found out elbows types only run to 27 inches. The guy recommended this Livorsi type sender that measures *air pressure in a small tube so there is no floating or bouncing gauge, has anybody here have one....Ted * * http://www.livorsi.com/catalog/waterproof.htm

[macojoe]

Looks good. But never heard of them??

Juast be like me, I have none for all the reasons you are trying to fix!

[Blu_Lunch]

MJ sorry to hear about your OB troubles I lost #2 cylinder on my Johnson last year on the first trip. I never heard of Livorsi myself but after looking thru the cataloge WOW nice chit, what is really nice is the dashboard gallery This stuff is OEM on a lot of the finest high performace boats....

[TheTinMan]

Check this one out too. Probe comes in 12" increments and can be cut to size desired.

http://www.centroidproducts.com/data.htm

[TheTinMan]

another:

http://wemausa.com/

[Blu_Lunch]

Thanks for the tip. I have ordered the Livorsi unit it should be here tommorrow the Centriod unit is simular to the one I bought... My CC tank is 32 inches deep..Ted