|  | 
|  | 
| 
			 
			#1  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  88' Merc 150 pics, for Hammer 
			
			Hammer, don't know if these will help, or if they are too late? *But, they are pics none the less and we all know you love yer pics... ;D First, the starboard side of my motor:  Next, a closeup of the trim / tilt solenoids:  Now, a fuzzy closer-up of the top solenoid.  On this picture, there are two components centered. *The piece on the left is the rectifier / regulator.  It's probably different from your 86' I'm guessing? Airslot 
				__________________ Airslot Airslot's V-20 Gallery | 
| 
			 
			#2  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  88' Merc 150 pics, for Hammer 
			
			Hammer, don't know if these will help, or if they are too late? *But, they are pics none the less and we all know you love yer pics... ;D First, the starboard side of my motor:  Next, a closeup of the trim / tilt solenoids:  Now, a fuzzy closer-up of the top solenoid.  On this picture, there are two components centered. *The piece on the left is the rectifier / regulator.  It's probably different from your 86' I'm guessing? Airslot 
				__________________ Airslot Airslot's V-20 Gallery | 
| 
			 
			#3  
			
			
			
			
			
		 | |||
| 
 | |||
|  Re: 88' Merc 150 pics, for Hammer 
			
			Airslot, great pics. and I think they will work. Like I said. I hear a clicking noise coming from the motor and no tilt, so I'm figuring I must replace the soliniod. Seen a used set on E-Bay for 40.00 bucks, but want to find out how much it is to replace with new. Again thanks. ;) 
				__________________ | 
| 
			 
			#4  
			
			
			
			
			
		 | |||
| 
 | |||
|  Re: 88' Merc 150 pics, for Hammer 
			
			Airslot, great pics. and I think they will work. Like I said. I hear a clicking noise coming from the motor and no tilt, so I'm figuring I must replace the soliniod. Seen a used set on E-Bay for 40.00 bucks, but want to find out how much it is to replace with new. Again thanks. ;) 
				__________________ | 
| 
			 
			#5  
			
			
			
			
			
		 | |||
| 
 | |||
|  Re: 88' Merc 150 pics, for Hammer 
			
			Hey Airslot, anyway of jumping the solinoid to raise it ?? 
		 
				__________________ | 
| 
			 
			#6  
			
			
			
			
			
		 | |||
| 
 | |||
|  Re: 88' Merc 150 pics, for Hammer 
			
			Hey Airslot, anyway of jumping the solinoid to raise it ?? 
		 
				__________________ | 
| 
			 
			#7  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Re: 88' Merc 150 pics, for Hammer 
			
			I belive that Blue Green Red & black are all for the trim. Black is ground so leave it alone, Red is the power. Blue & green is up and down. In my Yamaha all i had to do was touch lets say green cause I for got. to the red and the motor went up, blue and the motor went down. That got the motor up for me to work on the tilt motor. I am sure it will work for you also. [red]BUT WAIT FOR SOMEONE THAT NO"S MERC[/red] cause I no want you blowing anything else up!! :o 
				__________________ 1986 V20  Old Fishermen never die, we just SMELL that way!! | 
| 
			 
			#8  
			
			
			
			
			
		 | ||||
| 
 | ||||
|  Re: 88' Merc 150 pics, for Hammer 
			
			I belive that Blue Green Red & black are all for the trim. Black is ground so leave it alone, Red is the power. Blue & green is up and down. In my Yamaha all i had to do was touch lets say green cause I for got. to the red and the motor went up, blue and the motor went down. That got the motor up for me to work on the tilt motor. I am sure it will work for you also. [red]BUT WAIT FOR SOMEONE THAT NO"S MERC[/red] cause I no want you blowing anything else up!! :o 
				__________________ 1986 V20  Old Fishermen never die, we just SMELL that way!! | 
| 
			 
			#9  
			
			
			
			
			
		 | |||
| 
 | |||
|  Re: 88' Merc 150 pics, for Hammer 
			
			So, I shouldnt grab the screw driver just yet and start touching stuff just yet, ;D
		 
				__________________ | 
| 
			 
			#10  
			
			
			
			
			
		 | |||
| 
 | |||
|  Re: 88' Merc 150 pics, for Hammer 
			
			So, I shouldnt grab the screw driver just yet and start touching stuff just yet, ;D
		 
				__________________ | 
|  | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 |