|
|
#1
|
||||
|
||||
New member
Hi everybody! What a site! Since I bought my v-20 85 start looking for information about it an then found this, very nery nice, congratulations, very friendly...
I read threads but commenced from last page in order to see development and looking for more information also still in page 186 Well, when I saw this boat I just fall in love  , i felt fever and delirious.Now the O/B Jonhson 200 1985 suffer a very bad damage and looking for spare part or chase for newest one. My V-20 has a full transom and is equipped with "sea drive"? bracket but I'm worry about safe lifting capacity of the trim because the old jonhson weight 450 lbs and a good 200 hp 4 stroke weight 550 lbs around. Do you know something about that? Also, can be fixed any brand of o/b in this bracket or evinrude and jonhson only? Many thanks in advance for your help... Good ride and best fishing Tony 
|
|
#2
06-13-2011, 07:14 PM
|
||||
|
||||
|
Welcome Tony and congrats on the V20.
You will have to wait for one of the guys who have experience with the sea drive's. I owned an 1986 that was a sea drive which had been removed and a bracket put on the transom. That is your best way to go if you can. The hole made for the sea drive controls is small and easy to seal up. Then you can put any engine on there. But if it is a old heavy, or new heavy engine it will probably be too much weight at the end of a bracket. A 150 two stroke is the best.
__________________
Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW
|
|
#3
06-13-2011, 07:27 PM
|
||||
|
||||
|
Many Thanks Willy for your prompt replay, yes, I thinking in sea drive discard but I will try to keep due to is an original equipment, but if is the only way, has to do it at the mean time.
Thanks again. Rgrds Tony
|
|
#4
06-13-2011, 08:05 PM
|
||||
|
||||
|
welcome. i think willy is on the money, i've seen a few that have been converted, but always to a johnson/evinrude. a bracket is the way to go, so you can mount any manufactor's motor. where is los mochis in relation to the us border, might be a good idea to search nearby craig's list.
|
|
#5
06-13-2011, 10:18 PM
|
||||
|
||||
|
Sea drive
Thanks for your reply Phatdaddy, Los Mochis is at NW of Mexico, 450 Km at north of Mazatlan and 400 at South of Guaymas. 800 Km at South of Nogales Sonora/Arizona.
Los Mochis is a 500,000 population city and the port is Topolobampo in the Sea of Cortez we have a good fishing here like tuna, wahoo, sailfish, stripped marlin, dolphin and more Rgrds Tony
|
|
#6
06-14-2011, 09:55 AM
|
||||
|
||||
|
Hey, Welcome to the site Tony!
rkc
__________________
Sorry to say that I no longer have a 1984 V20 :(
|
|
#7
06-14-2011, 10:53 AM
|
||||
|
||||
|
Welcome, Tony...
Is 'very bad damage' to power-head? and the rest of the motor, lower unit (the drive) and all that OK?...if power-head replacement is what you need, I think there are certain replacements from OUTBOARDS that can be used for that purpose...as Willy said, we've got some pretty sharp guys around here who can advise you on that... If your sea-drive is shot to the point of total replacement, I would agree w/Willy except point out the Etec small block 200...light weight and as smooth as a 4-stroke w/out the WEIGHT of a 4-stroke...if you're going to buy new, that'd be my advise... Post up some pics of your boat...we'd like to see!!... 
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha 
|
|
#8
06-14-2011, 08:34 PM
|
||||
|
||||
|
Sea drive
Hi reelapeelin, many thanks for your suggestion, a etec sounds great, but over here is not common to find it, easily we can find yamaha and mercury and some jonhson.
Still looking for the monoblock, the rest are ok according with my mechanic guy, will see... Will try to post photos asap. Rgds Tony
|
|
#9
06-14-2011, 08:37 PM
|
||||
|
||||
|
Thanks
Many thanks RKC for welcome!!!
Rgrds Tony
|
|
#10
06-14-2011, 09:41 PM
|
|||
|
|||
|
Welcome to the site!
__________________
*************************************** Stay Safe!  Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke.
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
