![]() |
|
#1
|
|||
|
|||
|
where can I buy a new rope for my rub rail
|
|
#2
|
|||
|
|||
|
I got it at Home Depot.
|
|
#3
|
||||
|
||||
|
Any rope will work. Different colors will make it "pop". You can get it at any hardware store or boat store.
__________________
1983 V-20 capsized. . . . in the garage. |
|
#4
|
||||
|
||||
|
What size rope is used?
__________________
1987 V20 1996 Jonhson 150 OceanRunner |
|
#5
|
||||
|
||||
|
Good question and what type ? I too am going to do this mod. I thought 5/8' polly prop would work ??
|
|
#6
|
||||
|
||||
|
Braided Nylon, Poly will not work as it is not UV rated and will rot! 5/8 is about right, but make sure you put it in and then let it sit a few days before cutting the extra off, its going to stretch when pulling it to get on, and be to short when it shrinks after a few days of relaxing. een there done that!!
__________________
1986 V20 ![]() Old Fishermen never die, we just SMELL that way!! |
|
#7
|
||||
|
||||
|
Heck w rope... snag some led rope lights and get ur party on!
|
|
#8
|
||||
|
||||
|
That would be cool red & green The coast guard will love us . But lets add strobe 's for some flash
|
|
#9
|
|||
|
|||
|
Ditto Home Depot I use the Yellow, soak the entire rope in soap water if not is a PIA to install...Mine is due for a change since I did not secure the ends and it shrunk six inches on both ends > lesson learned not too tight and secure the ends using the existing hardware or new ones.
|
|
#10
|
||||
|
||||
|
Thanks for the info!!!
__________________
1987 V20 1996 Jonhson 150 OceanRunner |
![]() |
| Thread Tools | |
| Display Modes | |
|
|