Wellcraft V20 Community

Wellcraft V20 Community (https://forums.wmpdevserver1.com/community/index.php)
-   How To (https://forums.wmpdevserver1.com/community/forumdisplay.php?f=11)
-   -   rope rub rail (https://forums.wmpdevserver1.com/community/showthread.php?t=18034)

tanker1025 08-08-2012 07:04 PM

rope rub rail
 
where can I buy a new rope for my rub rail

joe7670 08-08-2012 09:26 PM

I got it at Home Depot.

jasoncooperpcola 08-08-2012 09:45 PM

Any rope will work. Different colors will make it "pop". You can get it at any hardware store or boat store.

Cam 09-01-2012 08:21 AM

What size rope is used?

GREYWOLF 02-25-2013 12:30 AM

Good question and what type ? I too am going to do this mod. I thought 5/8' polly prop would work ??

macojoe 03-05-2013 09:59 PM

Braided Nylon, Poly will not work as it is not UV rated and will rot! 5/8 is about right, but make sure you put it in and then let it sit a few days before cutting the extra off, its going to stretch when pulling it to get on, and be to short when it shrinks after a few days of relaxing. een there done that!!

smokeonthewater 03-05-2013 10:03 PM

Heck w rope... snag some led rope lights and get ur party on!

GREYWOLF 03-07-2013 12:07 AM

That would be cool red & green The coast guard will love us . But lets add strobe 's for some flash:sun:

nymack66 04-14-2013 06:20 PM

Ditto Home Depot I use the Yellow, soak the entire rope in soap water if not is a PIA to install...Mine is due for a change since I did not secure the ends and it shrunk six inches on both ends > lesson learned not too tight and secure the ends using the existing hardware or new ones.

Cam 04-21-2013 10:52 AM

Thanks for the info!!!


All times are GMT -5. The time now is 04:44 PM.

Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.