T-Top Install

[Sean]

Well I have a T-Top comming in from Atlantic Towers next week. I got a good deal on it as it was scuffed during a move on the lower portion of the leg, but it is structually sound and you can't even notice the scuff...
Heres a link to the top:http://www.atlantictowers.com/at_sub/products_fr.htm
Since my I have a solid deck, persummelly filled with foam I have two options for intall. 1, drill out to 6' holes between the legs to get under the deck to attach the plate, then cap the holes with Deck Plates. I would assume this root I would have to dig out some foam and compraise the deck. or 2. Drill holes into the deck, fill with resin and 5200 and hope the Top stays in place 2 sounds allot easier, but I'm not to confident and it being structually safe. and 1( just plane sound scary having to cut big old holes in my deck.
Link to install instructions:http://www.atlantictowers.com/at_sub...033107_Web.pdf

Have any of you had to install a Top in solid deck boat? and if so any advise? Either way I'm scared and do not want to mess it up..
As alway thanks for your help
And if anyone wants to take a trip to Newport and help out