Wellcraft V20 Community

Go Back   Wellcraft V20 Community > Wellcraft V-20 Forums > Repairs
Register FAQ Community Calendar Today's Posts Search

Reply
Thread Tools Display Modes
  #1  
Unread 05-05-2007, 10:28 AM
mmiklosz
Guest
 
Posts: n/a
Default pin striping

I have an '86 V20. Some of the pin stiping near the water line is showing a lot of wear. There is both a light blue stripe and dark blue strip. I would like to replace them with the same colors. I checked WEST Marine and Overtons without luck.

Any idea where I can find replacement pin striping?
Reply With Quote
  #2  
Unread 05-05-2007, 10:39 AM
chumbucket's Avatar
chumbucket chumbucket is offline
God
 
Join Date: Mar 2003
Posts: 5,067
Default Re: pin striping

It's called a boot stripe. ;) ;D
Most of the boating outlets will carry a generic three toned blue stripe tape. Most that I've seen, you can peel away one of the shades that you don't want. Some Easy Off Oven cleaner works well to remove the old boot stripe. Goo Gone also works well.
__________________
Heavily medicated for your protection.
Reply With Quote
  #3  
Unread 05-05-2007, 12:05 PM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default Re: pin striping

Auto parts store?
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
  #4  
Unread 05-05-2007, 12:53 PM
msbhammer msbhammer is offline
God
 
Join Date: Jul 2005
Location: Lewes, Delaware
Posts: 9,090
Default Re: pin striping

West Marine should carry it. I seen it there before. Just be careful using easy off, it takes off bottom paint.
__________________
http://i47.photobucket.com/albums/f153/msbhammer/BookCover-1.jpg
Reply With Quote
  #5  
Unread 05-05-2007, 02:18 PM
macojoe's Avatar
macojoe macojoe is offline
Administrator
 
Join Date: Mar 2003
Location: Carver, Ma.
Posts: 15,859
Send a message via AIM to macojoe Send a message via Yahoo to macojoe
Default Re: pin striping

Tape it and paint it, thats what I did ;D
__________________
1986 V20

Old Fishermen never die, we just SMELL that way!!
Reply With Quote
  #6  
Unread 05-05-2007, 02:54 PM
tsubaki's Avatar
tsubaki tsubaki is offline
God
 
Join Date: Mar 2007
Location: Savannah
Posts: 4,971
Send a message via ICQ to tsubaki
Default Re: pin striping

That's the easiest solution. :)
__________________

'75 Cuddy with '00 Johnson Ocean Pro 150 horse

Benny


Reply With Quote
  #7  
Unread 05-06-2007, 01:14 AM
msbhammer msbhammer is offline
God
 
Join Date: Jul 2005
Location: Lewes, Delaware
Posts: 9,090
Default Re: pin striping

So whats the best way to install new pin striping ? thnking about replacing that thin little blue line that goes along the top, but I know I cant paint a straight line, let alone try and run a pin striping straight. ???
__________________
http://i47.photobucket.com/albums/f153/msbhammer/BookCover-1.jpg
Reply With Quote
  #8  
Unread 05-06-2007, 08:42 AM
macojoe's Avatar
macojoe macojoe is offline
Administrator
 
Join Date: Mar 2003
Location: Carver, Ma.
Posts: 15,859
Send a message via AIM to macojoe Send a message via Yahoo to macojoe
Default Re: pin striping

Run tape top of linr then run tapr below the line, paint in between peel tape off, stright line you done ::)
__________________
1986 V20

Old Fishermen never die, we just SMELL that way!!
Reply With Quote
  #9  
Unread 05-07-2007, 11:38 AM
Stillrunning Stillrunning is offline
Senior Member
 
Join Date: Dec 2006
Location: Suffolk, Va.
Posts: 972
Send a message via ICQ to Stillrunning
Default Re: pin striping

I'd stick with tape as you can remove if you ever need to. Call your local sign shop or look to see if there is a shop that stripes cars. Both of them should have what your looking for without the marine mark up. Laying a stripe should be done in long sections at a time and just find a line on the boat and follow it as you lay the stripe. Most people try laying the line a foot or so at a time and this tends to give you an crooked line. I striped cars for years in my younger days and would be more than happy to help you. I live in the Va beach area and not sure where you live. If you do the job yourself make sure that the stripe does not have a protective film which does have to be removed. Some tapes have them and some don't.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:23 PM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.