![]() |
|
#1
|
|||
|
|||
|
well i got that 85 Johnson seized 150 engine torn apart. i had to cut off the exhaust housing with a cutting wheel to separate it from the block. i split the case and removed the pistons and rods. i enclosed a few pictures. i didn't think a seized engine would come apart so easily.
jet |
|
#2
|
|||
|
|||
|
Are you fixing it or just exploring?
__________________
*************************************** Stay Safe! Sold - 1984 V-20 Cuddy with a 2003 Johnson 140 hp gas sippin 4-stroke. 1995 Ranger 250C with a 2015 Suzuki 300 hp 4-stroke. |
|
#3
|
|||
|
|||
|
I've seen several engines that people thought the power head was locked up on but turned out to be a locked up lower unit. Just something to check.
__________________
1983 wellcraft v20 steplift Mercury 250efi on the bracket!!!! |
|
#4
|
|||
|
|||
|
no, i had separated the lower unit early in the project, i almost stripped the flywheel trying to turn it. then all the midsection bolts the attached to block either snapped or just turn. i had it hanging upside down for a while, spraying the bolts with pb blaster and applying some heat. all with no luck. finally last week i took a cutting wheel to the midsection. and separated it from the block i still have the lower unit intact. Probably take it to a shop and get an option on the block. will send pictures soon,
jet |
|
#5
|
||||
|
||||
|
I think MJ had a Mercury like that, wouldn't separate.
__________________
1985 Wellcraft V-20, Evinrude ETEC 150: SOLD 1979 Marine Trader 44, twin Ford Lehman 120s 2006 Panga 14, Tohatsu 20 |
|
#6
|
||||
|
||||
|
It was a 225 EVINRUDE. I remember because it was one I found on Ebay for him in south Florida.
__________________
2011 SUNDANCE B20CCR SKIFF, 2011 YAMAHA 90HP 4 STROKE, 2011 KARAVAN SINGLE AXLE ALUMINUM TRAILER, LOWRANCE ELITE-7 HDI, MINN KOTA RIPTIDE TROLLING MOTOR 2000CC HYDRA-SPORT 225+HP EVINRUDE SOLD ![]() AND THE PINK JEEP!!!! R.I.P. http://www.wellcraftv20.com/communit...ad.php?t=11664 |
|
#7
|
||||
|
||||
|
that's the main reason i do a water pump every year. keeps the bolts and drive shaft splines lubed up
|
![]() |
|
|