![]() |
|
#1
|
|||
|
|||
|
Anybody know if the swim platform on a V21 is thru-bolted or just screwed into the transom?
|
|
#2
|
||||
|
||||
|
I would like to think that all swim platforms are through bolted, at least at the top of them.
__________________
1987 V20 1996 Jonhson 150 OceanRunner |
|
#3
|
||||
|
||||
|
Thru-bolted is the way to go. Not sure about a factory V-21 platform. The P.O. replace the one on my boat and thru-bolted with starboard backing plate and generous 5200 around the bolts.
__________________
1994 Wellcraft V21 |
|
#4
|
||||
|
||||
|
Thru bolted.... Anything less would be uncivilized.
|
|
#5
|
||||
|
||||
|
stock was just screwed in.....I had to have my brace replaced. I use mine a good bit and went with oversized squared aluminum. Screwed in makes about as much sense as those dinky drains at the back of the deck....or leftover flooring laminate like they used on the gunnels......
__________________
- The charm of fishing is that it is the pursuit of what is elusive but obtainable, a perpetual series of occasions for hope. Lucky Jack - .......The Surprise is not old; no one would call her old. She has a bluff bow, lovely lines. She's a fine seaboat: weatherly, stiff and fast, very fast, if she's well handled. No, she's not old; she's in her prime. 85' Wellcraft 20 Fisherman "Guale Girl" 1979 Alumnacraft 14 - STILL got holes in it 2006 WS Tarpon160f - "Mudd Butt" |
|
#6
|
|||
|
|||
|
Thanks guys. Tried to remove the top screw today. Only moved slightly and hung up. I'd have to say thru-bolted.
|
|
#7
|
||||
|
||||
|
My 95 v21 (not a v20) has a stock swim platform that is thru bolted.
__________________
1995 V21 w/175 Evinrude E-Tec Morganville, New Jersey |
|
#8
|
|||
|
|||
|
they are thru bolted at least that's how mine is done.
|
|
#9
|
||||
|
||||
|
The 21 I had was thru-bolted...if yours is not you should remove it and redo it properly...
__________________
'74 V-20/ BF 150 '95 V-21/ BF 150 '84 V-20/ 200 2.4 Merc '87 V-20/'18 F150 Yamaha |
|
#10
|
||||
|
||||
|
Mine (96) was just screwed in from the factory. I drilled it through, used SS fender washers and 5/16 SS Carriage bolts. Coated the threads with Never-Seez and sealed the hole with 5200.
__________________
1987 V20 w/1987 150HP Yamaha on a Shoreland'r Trailer 1978 16.5 Airslot w/1996 120HP Force on a Four Winns trailer 1996 V21 w/1993 200HP Mercury on a Shoreline Trailer All towed by a 5.7L Hemi Durango. If God didn't have a purpose for us we wouldn't be here, so Live simply, Love generously, Care deeply, Speak kindly. (Leave the rest to God) ![]() Silence, in the face of evil, is itself evil. Not to speak is to speak, not to act is to act. God will not hold us guiltless. |
![]() |
|
|