|  | 
|  | 
| 
			 
			#1  
			
			
			
			
			
		 | |||
| 
 | |||
|  Very slow fuel fill... 
			
			I filled my full tank with $4.559 fuel on Saturday and it took for ever to pump about 42 gal. My 1994 cener console has never been able to accept the fuel at full flow for long without the fuel backing up on me , but now it's exceptionaly slow . I checked the gas vent and it does not seem to be stopped up . Does anyone have an idea of what the problem could be ? 
				__________________ 1994 V20 Fisherman & 2004 Yamaha 150 | 
| 
			 
			#2  
			
			
			
			
			
		 | |||
| 
 | |||
|   
			
			either the vent is clogged or is has a crap location on the tank, b/c i doubt your fill has a blockage.
		 | 
| 
			 
			#3  
			
			
			
			
			
		 | |||
| 
 | |||
|  fuel flow 
			
			I agree with cterr,You must have something clogging the vent,try blow it clear with an air line not too much pressure though!!! Regards Brian........... | 
| 
			 
			#4  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			I had the same problem......and my suggestion is REPLACE IT. was not that hard or expensive. works great now.   
				__________________ | 
| 
			 
			#5  
			
			
			
			
			
		 | |||
| 
 | |||
|   
			
			I may try to replace it after work on day this week . I can't think of anything else it could be . Thanks ....
		 
				__________________ 1994 V20 Fisherman & 2004 Yamaha 150 | 
| 
			 
			#6  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   
			
			mine did the exact same thing, I sold it before the time came to pull it apart. Tell you my thoughts, I think the vent is marginal in size to begin with and probably is not located well on the tank, especially when on a trailer and tilted back a little. Mine would blow fuel out the vent if I went to fast with the pump. I was going to do two things which I believe would have taken care of the problem, first change out the vent fuel line and insure no blockage at the fitting, second I would relocate the vent thru hull higher on the top of the gunnel just forward of where the current vent fitting is located. I also would insure that the bend in the vent line wasnot enough to allow air to escape without forcing fuel thru the line first 
				__________________ Willy 1986 V20 Old School 1992 V20 1992 150 Yamaha 1997 HydraSport 2250 Vector 2009 17' G3 Outfitter "G Spot" http://www.youtube.com/watch?v=TDebw...eature=related "I won't be wronged, I won't be insulted and I won't be laid on a hand on. I don't do these things to others and I require the same from them" JW | 
|  | 
| Thread Tools | |
| Display Modes | |
| 
 | 
 |